Williams Sound TGS PRO 720 system manual Using the PFM T31 Transmitter, See Battery Information on

USING THE PFM T31 TRANSMITTER

Note: Before you begin, make sure you have AA Alkaline batteries installed in the transmitter.

See Battery Information on page 15.

1.Plug the microphone into the “mic” jack on top of the transmitter.

2.Turn the power on: Place the FM switch to the “On” position.

3.Position the microphone as close to the speaker’s mouth as practical.

4.When you are ready to speak, turn the Mic Mute Switch to the “On” position. When you are done speaking, mute the mic by turning the switch to the “Off” position. This will eliminate any unwanted noise as a result of the transmitter being on.

5.Remember to turn the transmitter off when you are done using it: Turn the “FM” switch to the “Off” position.

FIG. 6: PFM T31 TRANSMITTER TOP VIEW

On/Off Switch

Mic	Off	On
	FM
	Mic
	Williams Sound FM
Mic Jack	Mic Mute Switch

Note On The Transmitter Antenna:

The microphone cord is the transmitting antenna. Do not bunch up the cord, wrap it tightly around your body, or wrap it around the transmitter. For maximum range, the cord should hang as straight as possible. The transmitter can be placed in a pants pocket, or clipped onto a belt or waistband. Make sure the transmitter is turned OFF when not in use.

10 ®