USING THE OPTIONAL CHG 3512 BATTERY CHARGER TO CHARGE THE PPA R35 RECEIVER
Before inserting the PPA R35 receivers into the charger, be sure that each receiver has NiMH batteries installed. Also, check to make sure the switch setting in the PPA R35 battery compartment indicates the “NiMH” setting.
Step 1: Plug the TFP 035 power supply into the AC wall outlet. Plug the power connector into the rear of the CHG 3512 unit (See Figure 13a).
Step 2: Insert the PPA R35 receivers into the charging slots. The receivers must be placed in the charger facing forward to make contact with charger contacts (See Figure 13b). A red LED indicator will illuminate when charging has started.
Important: Please refer to the CHG 3512 (MAN 116) instruction sheet for charging time and detailed setup instructions.
FIGURE 13A:
FIGURE 13B:
CHG 3512 Rear View
PPA R35 Receiver
CHG 3512 | ||
| CHG |
|
WARNING: DO NOT A |
|
|
TTEMPT TO |
|
|
RECHARGE D |
| |
| ISPOSABLE | |
|
| BATTERIES! |
CHG |
| |
Williams |
| |
| Sound |
|
CHG |
|
|
TFP 035
AC Power Connection
Charging LED | CHG |
| |
Indicator |
|
CHG |
|
WARNING: |
|
DO NOT |
|
ATTEMPT TO |
|
RECHARGE |
|
DISPOSABLE | |
| BATTERIES! |
CHG |
|
® | 17 |