CHANGING THE PFM T31 FREQUENCY
FIG. 7: PFM T31 FREQUENCY CHANGE
Frequency Switches
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Battery |
Compartment |
Switch Settings
MHz | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
72.1DN UP DN UP DN DN DN DN
72.3DN UP DN UP UP DN DN DN
72.5DN UP DN UP DN DN UP DN
72.6DN DN UP DN DN DN DN UP
72.7DN UP DN UP UP DN UP DN
72.8DN UP DN DN DN DN DN UP
72.9DN UP DN UP DN DN DN UP
74.7UP DN DN UP UP DN DN UP
75.3UP UP DN UP DN DN DN DN
75.4UP UP DN DN UP DN DN DN
75.5UP UP DN UP UP DN DN DN
75.7UP UP DN UP DN DN UP DN
75.9 UP UP DN UP UP DN UP DN
Begin by opening the battery compartment door. Remove the batteries, then open the back panel to expose the circuit board. Referencing the Switch Settings chart (above), adjust the frequency switches on the PFM T31 transmitter accordingly using a small screw driver or paper clip. Reinstall the batteries, then close the back of the transmitter. Plug in the mic, and turn on the transmitter to provide a tuning signal for the receivers. Be sure to change the receiver to the
corresponding channel.
® | 11 |