Husqvarna 435 manual Fueling, Fuel safety, Transport and storage, Long-term storage

Page 20

FUEL HANDLING

Fueling

!

WARNING! Taking the following

precautions, will lessen the risk of fire:

 

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling.The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

! flammable. Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

20 – English

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with

! visible damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Remove the spark plug cap from the spark plug. Activate the chain brake.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

115 10 82-95 Rev.2 2008-04-11

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 435 435e 440e KEY to Symbols Symbols on the machineSymbols in the operator’s manual You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherStop switch Right hand guardVibration damping system MufflerCutting equipment General rulesCutting equipment designed to reduce kickback BarSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethGeneral advice on adjusting depth gauge setting Increased if the depth gauge setting isAdjustment of depth gauge setting Too largeTensioning the chain Bar and cause serious or even fatal injury435 435e, 440eChecking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Assembly Fitting the bar and chain435 435e, 440e115 10 82-95 Rev.2 Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting Starting and StoppingStarting and stopping Stopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsTree felling technique LimbingLog is supported at one end. There is a high risk Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking the inertia brake release Muffler Tensioning the recoil spring StarterReplacing the starter cord Air filter Replacing the return and drive springsFitting the starter Recoil spring aSpark plug Lubricating the bar tip sprocketNeedle bearing lubrication Cooling systemWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesYour Warranty Rights and Obligations ´z+S=¶5Z¨ American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautions1151082-95

435 specifications

The Husqvarna 435 is a powerful, efficient chainsaw designed for both homeowners and professionals seeking a reliable tool for cutting, trimming, and taking on various tasks in their outdoor spaces. It combines a lightweight design with high-performance technology, making it an ideal choice for anyone from the occasional user to those needing a dependable tool for frequent use.

One of the standout features of the Husqvarna 435 is its X-Torq engine. This innovative motor delivers impressive power while significantly reducing fuel consumption and emissions compared to traditional two-stroke engines. With an engine displacement of 40.9cc, it produces a robust performance that allows the user to tackle even challenging cutting jobs with ease.

The chainsaw's AutoTune technology is another noteworthy characteristic. This feature automatically adjusts the engine's settings for optimal performance according to the surrounding conditions, such as temperature, altitude, and humidity. AutoTune ensures that users can achieve maximum efficiency without the hassle of manual tuning, allowing for a more user-friendly experience.

The Husqvarna 435 also boasts an ergonomic design, featuring a lightweight body that weighs only 9.4 lbs. This design promotes ease of handling and reduces fatigue during extended usage, making it suitable for long days of work. The integrated air filter system helps keep the engine clean, prolonging its life and ensuring reliable performance over time.

Safety is paramount in chainsaw design, and the Husqvarna 435 comes equipped with several safety features. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, as well as a low-vibration system that minimizes operator fatigue while enhancing comfort. The transparent fuel tank allows for easy monitoring of fuel levels, preventing unexpected interruptions.

Additionally, the saw features an easy-to-access chain tensioning system that simplifies chain adjustments, ensuring optimal cutting efficiency. The combination of a tool-less chain tensioner and a quick-release air filter cover makes maintenance straightforward, saving time and effort for users.

In summary, the Husqvarna 435 is an excellent choice for those seeking a versatile chainsaw that balances power, efficiency, and safety. With advanced engine technology, ergonomic design, and user-friendly features, it stands out in the competitive market. Whether you're cutting firewood, trimming branches, or performing general landscaping tasks, the Husqvarna 435 proves to be a reliable and efficient companion.
Top Page Image Contents