Husqvarna 435 KEY to Symbols, Symbols on the machine, Symbols in the operator’s manual

Page 2

KEY TO SYMBOLS

Symbols on the machine:

WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

Both of the operator′s hands must be used to operate the chain saw.

Never operate a chain saw holding it with one hand only.

Contact of the guide bar tip with any object must be avoided.

Tip contact may cause the guide bar to move suddenly upward and backward (so- called kickback), which may cause serious injury.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Symbols in the operator’s manual:

Switch off the engine before

carrying out any checks or maintenance. CAUTION! The

start/stop switch automatically

returns to run position. In order to prevent unintentional starting, the

spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

2 – English

Visual check.

Protective goggles or a visor must be worn.

Refuelling.

Filing with oil and adjusting oil flow.

The chain brake must be engaged when the chain saw is started.

You will find the following labels on your chain saw:

EPA II, CARB

The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. Category C = 50 hours, B = 125 hours, and A = 300 hours.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

115 10 82-95 Rev.2 2008-04-11

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 435 435e 440e Symbols in the operator’s manual KEY to SymbolsSymbols on the machine You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherVibration damping system Stop switchRight hand guard MufflerCutting equipment designed to reduce kickback Cutting equipmentGeneral rules BarSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethAdjustment of depth gauge setting General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Too large435 Tensioning the chainBar and cause serious or even fatal injury 435e, 440eChecking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication 435 AssemblyFitting the bar and chain 435e, 440e115 10 82-95 Rev.2 Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageStarting Starting and StoppingStarting and stopping Stopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLog is supported at one end. There is a high risk Tree felling techniqueLimbing Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking the inertia brake release Muffler Tensioning the recoil spring StarterReplacing the starter cord Fitting the starter Air filterReplacing the return and drive springs Recoil spring aNeedle bearing lubrication Spark plugLubricating the bar tip sprocket Cooling systemWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesYour Warranty Rights and Obligations ´z+S=¶5Z¨ Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions1151082-95

435 specifications

The Husqvarna 435 is a powerful, efficient chainsaw designed for both homeowners and professionals seeking a reliable tool for cutting, trimming, and taking on various tasks in their outdoor spaces. It combines a lightweight design with high-performance technology, making it an ideal choice for anyone from the occasional user to those needing a dependable tool for frequent use.

One of the standout features of the Husqvarna 435 is its X-Torq engine. This innovative motor delivers impressive power while significantly reducing fuel consumption and emissions compared to traditional two-stroke engines. With an engine displacement of 40.9cc, it produces a robust performance that allows the user to tackle even challenging cutting jobs with ease.

The chainsaw's AutoTune technology is another noteworthy characteristic. This feature automatically adjusts the engine's settings for optimal performance according to the surrounding conditions, such as temperature, altitude, and humidity. AutoTune ensures that users can achieve maximum efficiency without the hassle of manual tuning, allowing for a more user-friendly experience.

The Husqvarna 435 also boasts an ergonomic design, featuring a lightweight body that weighs only 9.4 lbs. This design promotes ease of handling and reduces fatigue during extended usage, making it suitable for long days of work. The integrated air filter system helps keep the engine clean, prolonging its life and ensuring reliable performance over time.

Safety is paramount in chainsaw design, and the Husqvarna 435 comes equipped with several safety features. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, as well as a low-vibration system that minimizes operator fatigue while enhancing comfort. The transparent fuel tank allows for easy monitoring of fuel levels, preventing unexpected interruptions.

Additionally, the saw features an easy-to-access chain tensioning system that simplifies chain adjustments, ensuring optimal cutting efficiency. The combination of a tool-less chain tensioner and a quick-release air filter cover makes maintenance straightforward, saving time and effort for users.

In summary, the Husqvarna 435 is an excellent choice for those seeking a versatile chainsaw that balances power, efficiency, and safety. With advanced engine technology, ergonomic design, and user-friendly features, it stands out in the competitive market. Whether you're cutting firewood, trimming branches, or performing general landscaping tasks, the Husqvarna 435 proves to be a reliable and efficient companion.
Top Page Image Contents