Husqvarna 435 Working Techniques, Before use, General working instructions, Basic safety rules

Page 23

WORKING TECHNIQUES

Before use:

,

1Check that the chain brake works correctly and is not damaged.

2Check that the rear right hand guard is not damaged.

3Check that the throttle lockout works correctly and is not damaged.

4Check that the stop switch works correctly and is not damaged.

5Check that all handles are free from oil.

6Check that the anti vibration system works and is not damaged.

7Check that the muffler is securely attached and not damaged.

8Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing.

9Check that the chain catcher is in place and not damaged.

10Check the chain tension.

General working instructions

IMPORTANT!

This section describes basic safety rules for using a chain saw. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you are not sure you can handle!

Before using a chain saw you must understand the effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback.

Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Basic safety rules

1 Look around you:

•To ensure that people, animals or other things cannot affect your control of the machine.

•To make sure that none of the above might come within reach of your saw or be injured by falling trees.

CAUTION! Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident.

2Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc.

3Take great care when removing small branches and avoid cutting bushes (i.e. cutting many small branches at the same time). Small branches can be grabbed by the chain and thrown back at you, causing serious injury.

4Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

5Take great care when cutting a tree that is under tension. A tree that is under tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to lose control. Both situations can cause serious personal injury.

115 10 82-95 Rev.2 2008-04-11

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 435 435e 440e You will find the following labels on your chain saw KEY to SymbolsSymbols on the machine Symbols in the operator’s manualContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsChain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipmentGeneral Safety Precautions Chain catcher Throttle lockoutMuffler Stop switchRight hand guard Vibration damping systemBar Cutting equipmentGeneral rules Cutting equipment designed to reduce kickbackGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingToo large General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Adjustment of depth gauge setting435e, 440e Tensioning the chainBar and cause serious or even fatal injury 435Checking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication 435e, 440e AssemblyFitting the bar and chain 435115 10 82-95 Rev.2 Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageStarting Starting and StoppingStarting and stopping Stopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueSafe distance Tree felling techniqueLimbing Log is supported at one end. There is a high riskDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking the inertia brake release Muffler Tensioning the recoil spring StarterReplacing the starter cord Recoil spring a Air filterReplacing the return and drive springs Fitting the starterCooling system Spark plugLubricating the bar tip sprocket Needle bearing lubricationWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations ´z+S=¶5Z¨ Other safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1151082-95

435 specifications

The Husqvarna 435 is a powerful, efficient chainsaw designed for both homeowners and professionals seeking a reliable tool for cutting, trimming, and taking on various tasks in their outdoor spaces. It combines a lightweight design with high-performance technology, making it an ideal choice for anyone from the occasional user to those needing a dependable tool for frequent use.

One of the standout features of the Husqvarna 435 is its X-Torq engine. This innovative motor delivers impressive power while significantly reducing fuel consumption and emissions compared to traditional two-stroke engines. With an engine displacement of 40.9cc, it produces a robust performance that allows the user to tackle even challenging cutting jobs with ease.

The chainsaw's AutoTune technology is another noteworthy characteristic. This feature automatically adjusts the engine's settings for optimal performance according to the surrounding conditions, such as temperature, altitude, and humidity. AutoTune ensures that users can achieve maximum efficiency without the hassle of manual tuning, allowing for a more user-friendly experience.

The Husqvarna 435 also boasts an ergonomic design, featuring a lightweight body that weighs only 9.4 lbs. This design promotes ease of handling and reduces fatigue during extended usage, making it suitable for long days of work. The integrated air filter system helps keep the engine clean, prolonging its life and ensuring reliable performance over time.

Safety is paramount in chainsaw design, and the Husqvarna 435 comes equipped with several safety features. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, as well as a low-vibration system that minimizes operator fatigue while enhancing comfort. The transparent fuel tank allows for easy monitoring of fuel levels, preventing unexpected interruptions.

Additionally, the saw features an easy-to-access chain tensioning system that simplifies chain adjustments, ensuring optimal cutting efficiency. The combination of a tool-less chain tensioner and a quick-release air filter cover makes maintenance straightforward, saving time and effort for users.

In summary, the Husqvarna 435 is an excellent choice for those seeking a versatile chainsaw that balances power, efficiency, and safety. With advanced engine technology, ergonomic design, and user-friendly features, it stands out in the competitive market. Whether you're cutting firewood, trimming branches, or performing general landscaping tasks, the Husqvarna 435 proves to be a reliable and efficient companion.
Top Page Image Contents