Husqvarna 435 manual Starter, Replacing the starter cord, Tensioning the recoil spring

Page 34

MAINTENANCE

Note! The screen must be replaced if it is damaged. If the screen is blocked the machine will overheat and this will cause damage to the cylinder and piston. Never use a machine with a muffler that is in poor condition. Never use a muffler if the spark arrestor screen is missing or defective.

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may cause fire if directed against dry and combustible material.

Starter

WARNING! When the recoil spring is

! wound up in the starter housing it is under tension and can, if handled carelessly, pop out and cause personal injury.

Care must be exercised when replacing the return spring or the starter cord. Wear protective glasses and protective gloves.

Replacing the starter cord

•Loosen the screws that hold the starter against the crankcase and remove the starter.

• Pull out the cord approx. 30 cm (12 inches) and hook it into the notch in the rim of the pulley. Release the recoil spring by letting the pulley rotate slowly backwards.

1 2

•Undo the bolt in the centre of the pulley and remove the drive disc (A), drive disc spring (B) and the pulley

(C). Insert and secure a new starter cord in the starter pulley. Wind approx. 3 turns of the starter cord on the starter pulley. Fit the starter pulley so that the end of the recoil spring (D) hooks into the starter pulley. Now assemble the drive disc spring, drive disc and the bolt in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Tie a good knot on the starter cord.

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned an additional 1/2 turn when the starter cord is pulled all the way out.

34 – English

115 10 82-95 Rev.2 2008-04-11

Page 33 Page 35
Image 34
Page 33 Page 35
Contents 435 435e 440e Symbols in the operator’s manual KEY to SymbolsSymbols on the machine You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherVibration damping system Stop switchRight hand guard MufflerCutting equipment designed to reduce kickback Cutting equipmentGeneral rules BarSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethAdjustment of depth gauge setting General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Too large435 Tensioning the chainBar and cause serious or even fatal injury 435e, 440eFilling with chain oil Lubricating cutting equipmentChecking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment 435 AssemblyFitting the bar and chain 435e, 440e115 10 82-95 Rev.2 Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageStarting and stopping Starting and StoppingStarting Stopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLog is supported at one end. There is a high risk Tree felling techniqueLimbing Safe distanceClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking the inertia brake release Muffler Replacing the starter cord StarterTensioning the recoil spring Fitting the starter Air filterReplacing the return and drive springs Recoil spring aNeedle bearing lubrication Spark plugLubricating the bar tip sprocket Cooling systemTemperature -5C 23F or colder Air Injection centrifugal cleaningWinter use Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesYour Warranty Rights and Obligations ´z+S=¶5Z¨ Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions1151082-95

435 specifications

The Husqvarna 435 is a powerful, efficient chainsaw designed for both homeowners and professionals seeking a reliable tool for cutting, trimming, and taking on various tasks in their outdoor spaces. It combines a lightweight design with high-performance technology, making it an ideal choice for anyone from the occasional user to those needing a dependable tool for frequent use.

One of the standout features of the Husqvarna 435 is its X-Torq engine. This innovative motor delivers impressive power while significantly reducing fuel consumption and emissions compared to traditional two-stroke engines. With an engine displacement of 40.9cc, it produces a robust performance that allows the user to tackle even challenging cutting jobs with ease.

The chainsaw's AutoTune technology is another noteworthy characteristic. This feature automatically adjusts the engine's settings for optimal performance according to the surrounding conditions, such as temperature, altitude, and humidity. AutoTune ensures that users can achieve maximum efficiency without the hassle of manual tuning, allowing for a more user-friendly experience.

The Husqvarna 435 also boasts an ergonomic design, featuring a lightweight body that weighs only 9.4 lbs. This design promotes ease of handling and reduces fatigue during extended usage, making it suitable for long days of work. The integrated air filter system helps keep the engine clean, prolonging its life and ensuring reliable performance over time.

Safety is paramount in chainsaw design, and the Husqvarna 435 comes equipped with several safety features. The chainsaw includes a chain brake that instantly stops the chain in the event of kickback, as well as a low-vibration system that minimizes operator fatigue while enhancing comfort. The transparent fuel tank allows for easy monitoring of fuel levels, preventing unexpected interruptions.

Additionally, the saw features an easy-to-access chain tensioning system that simplifies chain adjustments, ensuring optimal cutting efficiency. The combination of a tool-less chain tensioner and a quick-release air filter cover makes maintenance straightforward, saving time and effort for users.

In summary, the Husqvarna 435 is an excellent choice for those seeking a versatile chainsaw that balances power, efficiency, and safety. With advanced engine technology, ergonomic design, and user-friendly features, it stands out in the competitive market. Whether you're cutting firewood, trimming branches, or performing general landscaping tasks, the Husqvarna 435 proves to be a reliable and efficient companion.
Top Page Image Contents