Husqvarna LTH18538 HOW to USE Your Tractor, To SET Parking Brake See Fig, Stopping See Fig

Page 11

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 7)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal (B) all the way down and hold.

Pull parking brake lever (C) up and hold, release pres- sure from clutch/brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Make sure parking brake will hold tractor secure.

•Turn ignition key (F) to "STOP" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use the choke to stop the engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY

POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY TO DISCHARGE AND GO DEAD.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

pleteiy, as described above, and set

_I CAUTION:brakeAlwaysbeforeparkingstopleavingtractorthe opera=corn= tot's position.

TO USE THROTTLE CONTROL (D) (See Fig. 9)

Always operate engine at full speed (fast).

• Operating engine at less than full speed (fast) reduces engine's operating efficiency.

• Full speed (fast) offers the best mower performance.

Fig. 7

STOPPING (See Fig. 8)

MOWER BLADES -

•To stop mower blades, place attachment clutch control in the "DISENGAGED" position (r_).

Fig. 9

(l_ll)

ATTACHMENT

(ll_)

ATTACHMENT

 

CLUTCH LEVER

 

CLUTCH LEVER

 

"DISENGAGED ....

 

ENGAGED"

Fig. 8

GROUND DRIVE -

•To stop ground drive, depress brake pedal all the way down.

•Move motion control lever (J) to neutral position.

TO MOVE FORWARD AND BACKWARD (See Fig. 10)

The direction and speed of movement is controlled by the motion control lever. (J)

•Start tractor with motion control lever in neutral position.

•Release parking brake.

•Slowly move motion control lever to desired position.

ENGINE -

• Move

throttle control (D) between half and full speed

 

(fast)

position.

 

NOTE: Failure to move throttle control between half and full

 

speed (fast) position, before stopping, may cause engine

 

to "backfi re".

Fig. 10

 

1 1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 532 43 62-86 Rev Ft. Slope Operation Safe Operation Practices for Ride=On MowersGeneral Operation Safe Handling of Gasoline RulesSafe Operation Practices IV. TowingContents Steering Wheel Unassembled PartsBefore Removing Tractor from AssemblyTools Required for Assembly To Remove Tractor from CartonTo Adjust Seat See Fig INSTALL Seat See FigsTo Install Hood Scoop See Fig Check for Proper Position of ALL Belts JchecklistCheck TiRE Pressure Check Deck LevelnessOperation 1 e -IbReverse Operation System ROS on POSI= Know Your TractorStopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control D See FigTo Stop Mower Blades To Adjust Mower Cutting HeightTo Adjust Gauge Wheels See Fig To Operate MowerTowing Carts & Other Attachments Before Starting the EngineAutomatic Transmission Warm UP Mowing TipsPurge Transmission Schedule MaintenanceChart General RecommendationsBlade Removal See Fig BatteryTractor Blade CareLubrication Transaxle MaintenanceClean AIR Screen Transaxle Pump FluidSpark Plugs CleaningEngine Cooling System See Fig MufflerTo Remove Mower See Fig Service and AdjustmentsTo iNSTALL Mower See Adjustments ServiceTo Level Mower AI L- WTo Check Brake Belt InstallationTo Replace Mower Blade Drive Belt To Replace Motion Drive BeltSee Fig To Adjust Steering Wheel AlignmentTransaxle Motion Control Lever To Remove Wheel See FigEngine TransmissionCylinders OtherFuel System Engine OILTroubleshooting If so equipped KEY Part DecalsWheels TiresQD D SchematicTractor -- Model Number LTH18538 Electrical Electrical Chassis Tractor --MODEL Number LTH18538KEY Part Description KEYDrive Drive Optional Equipment Tractor -- Model Number LTH18538Engine Engine Steering Assembly KEY Part NO. no Mower Deck KEY Part Mower Deck1089 100 101 Mower LiftSeat Assembly Tufftorq Transaxle Model NO. K46BA LO9DESCRiPTiON Briggs Engine Model Number 31 N707, Type Number 1374-B1 132gREPLACEMENTLO4O,,,%. ,, ,o5,+ KEY Part NO. no Use 692011 Rod-Push Exhaust With Liquid Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationHusqvarna HOW To Obtain Service Consumer Wheeled Warranty Chart Tic Wrs Service Otes Husqvarna

LTH18538 specifications

The Husqvarna LTH18538 is a robust and versatile riding lawn mower designed for homeowners seeking a reliable solution for lawn care. This mower is equipped with a powerful 18.5 horsepower Kohler engine, which provides ample power to tackle different terrains and ensures a reliable start every time. It features a hydrostatic transmission that offers smooth and effortless operation, allowing users to experience a more enjoyable mowing experience without the need for gear shifting.

One of the standout features of the LTH18538 is its 38-inch cutting deck. The cutting deck is made from durable materials and ensures a clean and precise cut, contributing to a healthier lawn. The mower also offers a variety of cutting heights, adjustable from 1 to 4 inches, allowing users to customize the grass height based on their preferences and lawn conditions. The design of the cutting deck enhances maneuverability, making it easier to navigate around trees and garden beds.

Comfort and convenience are key considerations in the design of the Husqvarna LTH18538. It comes with an ergonomic seat with adjustable armrests, ensuring that users can mow for extended periods without discomfort. The steering wheel is positioned for easy access, and the controls are intuitively laid out, enhancing the overall user experience. The large rear tires provide excellent traction, even on uneven ground, which ensures that the mower can handle inclines and rough patches effectively.

Technologically, the LTH18538 is equipped with features that enhance performance and ease of maintenance. The mower has a built-in electric blade engagement system, allowing users to start the blades quickly and efficiently. An easy-to-access battery, along with a convenient air filter, makes routine maintenance hassle-free. Additionally, the mower's compact size allows for easy storage in garages or sheds, making it an ideal choice for those with limited space.

Overall, the Husqvarna LTH18538 combines power, convenience, and innovative technology, making it a standout model in the riding mower segment. Suitable for small to medium-sized lawns, this model strikes a perfect balance between performance and user comfort, ensuring a well-maintained lawn with minimal effort. Whether it's for regular mowing or seasonal upkeep, the LTH18538 is an excellent addition to any home gardening toolkit.
Top Page Image Contents