Husqvarna LTH18538 Jchecklist, Check TiRE Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

_iL.WARNING: Before starting, read, understand and follow

all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in

front of tractor is clear of other people and objects.

TO ROLLTRACTOR OFF SKiD (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in "transmission disengaged" position (See "TO TRANSPORT" in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

Continue with the instructions that follow.

CHECK TiRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and

Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See "TO CHECK BRAKE" in the Service and Adjustments section of this manual.

J'CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST

PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST7

J" All assembly instructions have been completed. J" No remaining loose parts in carton.

J" Battery is properly prepared and charged.

J" Seat is adjusted comfortably and tightened securely.

J" All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

J" Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

J" Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

J" Check wiring. See that all connections are still secure and wires are properly clamped.

J" Before driving tractor, be sure freewheel control is in "transmission engaged" position (See "TO TRANS- PORT" in the Operation section of this manual).

WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT

ITEMS:

J" Engine oil is at proper level.

J" Fuel tank is filled with fresh, clean, regular unleaded gasoline.

J" Become familiar with all controls, their location and function. Operate them before you start the engine.

J" Be sure brake system is in safe operating condition.

J" Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

J" It is important to purge the transmission before operat- ing your tractor for the first time. Follow proper starting andtransmission purging instructions (See "TO START ENGINE" and"PURGE TRANSMISSION" inthe Opera- tion section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 532 43 62-86 Rev Ft. Slope Operation Safe Operation Practices for Ride=On MowersGeneral Operation Rules Safe Operation PracticesIV. Towing Safe Handling of GasolineContents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor fromTo Adjust Seat See Fig INSTALL Seat See FigsTo Install Hood Scoop See Fig Jchecklist Check TiRE PressureCheck Deck Levelness Check for Proper Position of ALL Belts1 e -Ib OperationKnow Your Tractor Reverse Operation System ROS on POSI=HOW to USE Your Tractor To SET Parking Brake See FigTo USE Throttle Control D See Fig Stopping See FigTo Adjust Mower Cutting Height To Adjust Gauge Wheels See FigTo Operate Mower To Stop Mower BladesBefore Starting the Engine Towing Carts & Other AttachmentsAutomatic Transmission Warm UP Mowing TipsPurge Transmission Maintenance ChartGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigTransaxle Maintenance Clean AIR ScreenTransaxle Pump Fluid LubricationCleaning Engine Cooling System See FigMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo iNSTALL Mower See Service AdjustmentsAI L- W To Level MowerBelt Installation To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt To Check BrakeTo Adjust Steering Wheel Alignment Transaxle Motion Control LeverTo Remove Wheel See Fig See FigTransmission EngineOther Fuel SystemEngine OIL CylindersTroubleshooting If so equipped Decals WheelsTires KEY PartSchematic QD DTractor -- Model Number LTH18538 Electrical Electrical Tractor --MODEL Number LTH18538 ChassisKEY KEY Part DescriptionDrive Drive Optional Equipment Tractor -- Model Number LTH18538Engine Engine Steering Assembly KEY Part NO. no Mower Deck Mower Deck KEY PartMower Lift 1089 100 101Seat Assembly LO9 Tufftorq Transaxle Model NO. K46BADESCRiPTiON 132gREPLACEMENT Briggs Engine Model Number 31 N707, Type Number 1374-B1LO4O,,,%. ,, ,o5,+ KEY Part NO. no Use 692011 Rod-Push Exhaust With Liquid Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXHusqvarna HOW To Obtain Service Consumer Wheeled Warranty Chart Tic Wrs Service Otes Husqvarna

LTH18538 specifications

The Husqvarna LTH18538 is a robust and versatile riding lawn mower designed for homeowners seeking a reliable solution for lawn care. This mower is equipped with a powerful 18.5 horsepower Kohler engine, which provides ample power to tackle different terrains and ensures a reliable start every time. It features a hydrostatic transmission that offers smooth and effortless operation, allowing users to experience a more enjoyable mowing experience without the need for gear shifting.

One of the standout features of the LTH18538 is its 38-inch cutting deck. The cutting deck is made from durable materials and ensures a clean and precise cut, contributing to a healthier lawn. The mower also offers a variety of cutting heights, adjustable from 1 to 4 inches, allowing users to customize the grass height based on their preferences and lawn conditions. The design of the cutting deck enhances maneuverability, making it easier to navigate around trees and garden beds.

Comfort and convenience are key considerations in the design of the Husqvarna LTH18538. It comes with an ergonomic seat with adjustable armrests, ensuring that users can mow for extended periods without discomfort. The steering wheel is positioned for easy access, and the controls are intuitively laid out, enhancing the overall user experience. The large rear tires provide excellent traction, even on uneven ground, which ensures that the mower can handle inclines and rough patches effectively.

Technologically, the LTH18538 is equipped with features that enhance performance and ease of maintenance. The mower has a built-in electric blade engagement system, allowing users to start the blades quickly and efficiently. An easy-to-access battery, along with a convenient air filter, makes routine maintenance hassle-free. Additionally, the mower's compact size allows for easy storage in garages or sheds, making it an ideal choice for those with limited space.

Overall, the Husqvarna LTH18538 combines power, convenience, and innovative technology, making it a standout model in the riding mower segment. Suitable for small to medium-sized lawns, this model strikes a perfect balance between performance and user comfort, ensuring a well-maintained lawn with minimal effort. Whether it's for regular mowing or seasonal upkeep, the LTH18538 is an excellent addition to any home gardening toolkit.
Top Page Image Contents