Husqvarna How to Adjust Your Cambered Lawn Mower and Ensure Proper Front Wheel Alignment
Page 22

SERVICE AND ADJUSTMENTS

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and beforeoperatingthetractor. See“PURGETRANSMISSION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL

ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 22)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE

COVER

SQUARE KEY (REAR WHEEL ONLY)

FIG. 22

TO START ENGINE WITH A WEAK BATTERY (See Fig. 23)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

02614

WEAK OR DEAD

FULLY CHARGED

BATTERY

BATTERY

FIG. 23

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents LTH1842TWIN General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts Steering WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Battery See a Install Seat See Figs a and 2bAttach Hood Scoop See b Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Move Forward and BackwardTo Operate Mower See Fig To Adjust Mower Cutting Height See FigUsing the Reverse Operation System Reverse Operation System ROSSee FigCheck Engine OIL Level Before Starting the EngineTo Transport See Figs ADD GasolinePurge Transmission Mowing TipsAutomatic Transmission Warm UP Service Dates MaintenanceLubrication Chart General RecommendationsTo Sharpen Blade See B TractorBlade Removal See a Check Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Service and Adjustments To Replace Motion Drive BELTSee FIG Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Start Engine with a Weak Battery See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Suggested Guide for Sighting Slopes for Safe Operation 532 41 22-42 01.19.07 AP

LTH1842 specifications

The Husqvarna LTH1842 is a reliable and efficient riding mower designed for homeowners who need a robust lawn care solution. Engineered with a focus on performance and user comfort, this model is an excellent choice for those maintaining medium to large-sized yards.

One of the standout features of the LTH1842 is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power for a smooth cutting experience, ensuring that grass is cut evenly and effectively. Users will appreciate the automatic transmission, which allows for effortless speed adjustments and makes mowing a straightforward task, even on hilly terrain.

The cutting deck is another highlight of the Husqvarna LTH1842. With a width of 42 inches, it features a reinforced design that enhances durability. The cutting height can be adjusted to six different positions, ranging from 1 to 4 inches, giving users the flexibility to choose the perfect height for their lawn. Additionally, the fan-assisted bagger option helps collect grass clippings efficiently, promoting a cleaner mowing experience.

Ease of use is integrated throughout the design of the LTH1842. The ergonomic steering wheel and high-back seat are designed for comfort, especially during extended mowing sessions. The clear dashboard makes it simple for operators to monitor their speed and fuel levels without distraction.

Moreover, the Husqvarna LTH1842 incorporates advanced technology to enhance functionality. The ReadyStart system enables quick starts without the need for priming, ensuring that your mower is ready when you are. The mower is also compatible with a wide range of attachments, allowing it to perform additional tasks throughout different seasons, such as mulching and snow clearing.

Safety features, including an automatic shut-off mechanism when the operator leaves the seat, ensures that the user operates the machine securely. The LTH1842 also comes with a strong warranty, reflecting the manufacturer’s confidence in the machine's durability and performance.

In summary, the Husqvarna LTH1842 is a versatile riding mower that combines power, comfort, and innovative features. It is well-suited for homeowners looking for a reliable solution to maintain their lawns efficiently. With its robust engine, adjustable cutting deck, and user-friendly design, the LTH1842 delivers performance and convenience for a superior mowing experience.
Top Page Image Contents