Husqvarna LTH1842 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

Page 23

SERVICE AND ADJUSTMENTS

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 24)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02778

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see enigne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

FIG. 24

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents LTH1842TWIN II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceIII. Children Table of Contents Steering Wheel Unassembled PartsBefore Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonAttach Hood Scoop See b Install Seat See Figs a and 2bCheck Battery See a Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To Move Forward and Backward HOW to USE Your TractorReverse Operation System ROSSee Fig To Adjust Mower Cutting Height See FigUsing the Reverse Operation System To Operate Mower See FigADD Gasoline Before Starting the EngineTo Transport See Figs Check Engine OIL LevelAutomatic Transmission Warm UP Mowing TipsPurge Transmission General Recommendations MaintenanceLubrication Chart Service DatesCheck Operator Presence System TractorBlade Removal See a To Sharpen Blade See BEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Service and Adjustments To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive BELTSee FIGFront Wheel TOE-IN/CAMBER Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points With attachment clutch Suggested Guide for Sighting Slopes for Safe Operation 532 41 22-42 01.19.07 AP

LTH1842 specifications

The Husqvarna LTH1842 is a reliable and efficient riding mower designed for homeowners who need a robust lawn care solution. Engineered with a focus on performance and user comfort, this model is an excellent choice for those maintaining medium to large-sized yards.

One of the standout features of the LTH1842 is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power for a smooth cutting experience, ensuring that grass is cut evenly and effectively. Users will appreciate the automatic transmission, which allows for effortless speed adjustments and makes mowing a straightforward task, even on hilly terrain.

The cutting deck is another highlight of the Husqvarna LTH1842. With a width of 42 inches, it features a reinforced design that enhances durability. The cutting height can be adjusted to six different positions, ranging from 1 to 4 inches, giving users the flexibility to choose the perfect height for their lawn. Additionally, the fan-assisted bagger option helps collect grass clippings efficiently, promoting a cleaner mowing experience.

Ease of use is integrated throughout the design of the LTH1842. The ergonomic steering wheel and high-back seat are designed for comfort, especially during extended mowing sessions. The clear dashboard makes it simple for operators to monitor their speed and fuel levels without distraction.

Moreover, the Husqvarna LTH1842 incorporates advanced technology to enhance functionality. The ReadyStart system enables quick starts without the need for priming, ensuring that your mower is ready when you are. The mower is also compatible with a wide range of attachments, allowing it to perform additional tasks throughout different seasons, such as mulching and snow clearing.

Safety features, including an automatic shut-off mechanism when the operator leaves the seat, ensures that the user operates the machine securely. The LTH1842 also comes with a strong warranty, reflecting the manufacturer’s confidence in the machine's durability and performance.

In summary, the Husqvarna LTH1842 is a versatile riding mower that combines power, comfort, and innovative features. It is well-suited for homeowners looking for a reliable solution to maintain their lawns efficiently. With its robust engine, adjustable cutting deck, and user-friendly design, the LTH1842 delivers performance and convenience for a superior mowing experience.
Top Page Image Contents