Husqvarna LTH1842 manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing brake pedal.

•Place freewheel control in "transmission disengaged position" (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

•Sit on seat in operating position, depress brake pedal and set the parking brake.

•Raise attachment lift lever to its highest position.

•Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this manual). After engine has started, move throttle control to idle (slow) position.

•Release parking brake.

•Slowly depress forward drive pedal and drive tractor off skid.

•Apply brake to stop tractor and set parking brake.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before op- erating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LTH1842TWIN Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidAttach Hood Scoop See b Install Seat See Figs a and 2bCheck Battery See a Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Move Forward and BackwardTo Adjust Mower Cutting Height See Fig Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROSSee FigBefore Starting the Engine To Transport See FigsCheck Engine OIL Level ADD GasolineAutomatic Transmission Warm UP Mowing TipsPurge Transmission Maintenance Lubrication ChartService Dates General RecommendationsTractor Blade Removal See aTo Sharpen Blade See B Check Operator Presence SystemEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Service and Adjustments Belt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive BELTSee FIG To Check BrakeTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Suggested Guide for Sighting Slopes for Safe Operation 532 41 22-42 01.19.07 AP

LTH1842 specifications

The Husqvarna LTH1842 is a reliable and efficient riding mower designed for homeowners who need a robust lawn care solution. Engineered with a focus on performance and user comfort, this model is an excellent choice for those maintaining medium to large-sized yards.

One of the standout features of the LTH1842 is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power for a smooth cutting experience, ensuring that grass is cut evenly and effectively. Users will appreciate the automatic transmission, which allows for effortless speed adjustments and makes mowing a straightforward task, even on hilly terrain.

The cutting deck is another highlight of the Husqvarna LTH1842. With a width of 42 inches, it features a reinforced design that enhances durability. The cutting height can be adjusted to six different positions, ranging from 1 to 4 inches, giving users the flexibility to choose the perfect height for their lawn. Additionally, the fan-assisted bagger option helps collect grass clippings efficiently, promoting a cleaner mowing experience.

Ease of use is integrated throughout the design of the LTH1842. The ergonomic steering wheel and high-back seat are designed for comfort, especially during extended mowing sessions. The clear dashboard makes it simple for operators to monitor their speed and fuel levels without distraction.

Moreover, the Husqvarna LTH1842 incorporates advanced technology to enhance functionality. The ReadyStart system enables quick starts without the need for priming, ensuring that your mower is ready when you are. The mower is also compatible with a wide range of attachments, allowing it to perform additional tasks throughout different seasons, such as mulching and snow clearing.

Safety features, including an automatic shut-off mechanism when the operator leaves the seat, ensures that the user operates the machine securely. The LTH1842 also comes with a strong warranty, reflecting the manufacturer’s confidence in the machine's durability and performance.

In summary, the Husqvarna LTH1842 is a versatile riding mower that combines power, comfort, and innovative features. It is well-suited for homeowners looking for a reliable solution to maintain their lawns efficiently. With its robust engine, adjustable cutting deck, and user-friendly design, the LTH1842 delivers performance and convenience for a superior mowing experience.
Top Page Image Contents