Husqvarna LT120 To Convert to Bagging or Discharging, Check Tire Pressure, Check Deck Levelness

Page 8

ASSEMBLY

DEFLECTOR

 

SHIELD

 

 

FLAT

 

WASHER

HANG

LOCK

WASHER

TAB

 

MULCHER

WING NUT

PLATE

 

FIG. 6

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: If discharging or bagging results are unsatisfactory with mulcher blades on mower, remove the mulcher blades and install high performance discharging blades, which are available at an authorized service center/department. (See MOWER in the Repair Parts section of this manual).

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” on page 3 of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LT 1 2 IV. Service Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationModel Number LT120 Serial Product SpecificationsCustomer Responsibilities Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Install Mulcher Plate See FigsTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport ADD GasolineMowing Tips Mulching Mowing TipsLubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USEBattery TractorBrake Operation TiresEngine BeltsTransaxle Cooling LubricationSpark Plugs CleaningMuffler To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTransaxle Shifter Linkage and AD- Justment See Figs Front Wheel TOE-IN/CAMBERTo Remove Hood and Grill Assembly See Fig To Adjust Throttle Control Cable See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor See Fig Preliminary SettingFinal Setting Acceleration TestStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionOFF CUT This OUT Dotted Is a SlopeWarranty Statement Limited WarrantyWiring Insulated Clips SchematicIgnition Switch Electrical KEY Part NO. NO. Description Chassis and Enclosures Repair Parts Drive KEY Part NO. no Description Steering Assembly KEY Part Description NO. no Seat Assembly KEY Part Description DecalsWheels & Tires Engine Repair Parts Mower Deck Repair Parts Mower Lift Repair Parts Peerless Transaxle Model Number 930-054A Part Description Rev 10.07.96 Kfsw

LT120 specifications

The Husqvarna LT120 represents a remarkable balance of performance, durability, and user-friendly design, making it an ideal choice for homeowners looking to maintain their lawns efficiently. This riding lawn mower is engineered with a focus on comfort and functionality, ensuring that each mowing session is as productive as possible.

One of the most notable features of the LT120 is its powerful 17.5 HP Briggs & Stratton engine. This reliable engine ensures that the mower can tackle various terrains effortlessly, offering consistent power and performance even in challenging conditions. The efficient engine design also translates into lower fuel consumption, making it a cost-effective solution for lawn maintenance.

The LT120 boasts a 42-inch cutting deck, which allows for considerable coverage in a single pass. The deck is constructed from stamped steel, ensuring durability and longevity while providing a clean, precise cut. Additionally, the cutting height can be easily adjusted to six different settings, ranging from one to four inches, giving users the flexibility to achieve their desired lawn height.

For user comfort, the LT120 features an ergonomic steering wheel and a comfortable, adjustable seat. These enhancements make it easier for users to navigate their lawns for extended periods without discomfort. The mower's compact design also contributes to its maneuverability, allowing it to reach tight spaces and corners that larger models might struggle with.

Another impressive aspect of the Husqvarna LT120 is its easy-to-use hydrostatic transmission. This technology allows for smooth and seamless speed adjustments without the need for manual gear shifting. Users can simply press the pedals to change speed and direction, making the mowing experience more intuitive and less physically demanding.

Safety is paramount in the design of the LT120. It is equipped with features such as an automatic blade engagement system, which ensures that the blades only engage when the operator is seated. Additionally, the machine includes a reverse operating system that allows users to mow in reverse safely.

Overall, the Husqvarna LT120 combines power, efficiency, and comfort, making it a superb choice for residential lawn care. With its quality construction and thoughtful design features, it provides an exceptional mowing experience, helping homeowners achieve a well-maintained lawn with ease. Whether tackling small or medium-sized lawns, the LT120 ensures that lawn care is a task that can be handled with confidence and satisfaction.
Top Page Image Contents