JBL Professional BASSQ manual Using the Remote Button Function, Remote Control Operation

Page 7

REMOTE CONTROL OPERATION

USING THE REMOTE

BUTTON

FUNCTION

 

 

 

 

 

On

Turns on JBL BassQ system

 

 

 

 

Standby

Places unit in Standby

 

 

 

 

BassQ

Runs JBL BassQ calibration

 

 

 

 

Bypass

Bypasses internal DSP

 

 

 

 

Stereo/Mono

Toggles between Stereo and Mono input mode

 

 

 

 

Movie/Music

Toggles between Movie and Music EQ mode

 

 

 

REMOTE CONTROL BATTERY INSTALLATION

The remote control requires one CR2032 battery. The battery should be replaced as needed. When battery power is low, the remote control enters a low-voltage con- dition, preventing it from operating the JBL BassQ unit. When this occurs, replace the batteries. Normal operation will resume when new batteries are installed.

To replace the remote control batteries:

1.Locate the battery compartment on the back of the remote control. Pull down on the battery tray to slide out the old battery. The tray is held in place by a pressure-fit lock and requires a small amount of force to remove.

2.Remove the old battery.

3.Observing the proper polarity, insert one CR2032 battery.

4.Slide the battery tray back into the remote until the tray locks into place.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME (CR2032)

OR EQUIVALENT TYPE.

WARNING:

•DO NOT EXPOSE BATTERIES TO EXCESSIVE HEAT SUCH AS DIRECT SUNLIGHT, FIRE OR THE LIKE.

•DISPOSE OF DEAD BATTERIES IN ACCORDANCE WITH LOCAL REGULATIONS.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents JBL Performance Series JBL Bassq Automatic ROOM-MODE-CORRECTION Processor Important Safety Instructions Introduction FeaturesIncluded Accessories Introduction and FeaturesOperation and Controls Movie Trigger Input Main Power SwitchPower Trigger Input Jack Power Trigger OutputsRemote Control Operation Using the Remote Button FunctionTo replace the remote control batteries AVA7 Connecting Your JBL Performance Series SystemGeneral Information AV2Installing the JBL Bassq Processor Physical InstallationSide view of amplifier without rack ear Calibration and Room Mode Correction Troubleshooting JBL Bassq Specifications Audio CharacteristicsGeneral

BASSQ specifications

JBL Professional has long been synonymous with high-quality audio, and the JBL Professional BASSQ is no exception. This innovative product is specifically designed for audio professionals seeking to enhance low-frequency performance in live sound and studio environments. With its array of advanced features and cutting-edge technologies, the BASSQ offers an unrivaled listening experience.

One of the standout features of the BASSQ is its advanced equalization capabilities. The device is equipped with a powerful four-band EQ, allowing users to precisely shape their sound. This feature is particularly useful for tailoring bass response to suit specific environments, whether in a club, theater, or recording studio. The BASSQ's intuitive interface makes it easy for users to adjust the frequency bands, ensuring optimal performance in any setting.

At the core of the BASSQ’s design is its projection technology, which enhances low-frequency output while maintaining clarity in the mid and high ranges. This technology minimizes distortion at high volume levels, making it suitable for large venues and demanding applications. The BASSQ ensures that the bass is tight and punchy, delivering a sound that is both powerful and articulate.

In addition to its sound-shaping capabilities, the BASSQ features advanced connectivity options. Equipped with multiple input and output configurations, including XLR and TRS connectors, it integrates seamlessly into various audio setups. This versatility makes it ideal for both live performance and studio applications.

Durability is another key characteristic of the JBL Professional BASSQ. Constructed with rugged materials, it is built to withstand the rigors of both touring and permanent installation. The unit is designed to meet the demands of professional use, ensuring longevity and reliability in any environment.

Moreover, the user-friendly design of the BASSQ is complemented by LED indicators that provide real-time feedback on signal status and levels. This enhances the user experience and makes it easier for audio engineers to monitor settings during performances.

Overall, the JBL Professional BASSQ stands out as a state-of-the-art solution for professionals in the audio industry. With its powerful equalization features, advanced projection technology, robust connectivity, and durable construction, it is an essential tool for achieving superior sound quality. Whether mixing in the studio or performing live, the BASSQ offers the flexibility and performance required to elevate any audio production.
Top Page Image Contents