JBL Professional BASSQ manual Physical Installation, Installing the JBL Bassq Processor

Page 9

INSTALLING THE JBL BASSQ PROCESSOR

PHYSICAL INSTALLATION

Installation of the JBL BassQ unit is a straightforward process.

IMPORTANT:

The JBL BassQ unit must be installed following the directions below.

Always put amplifiers on the bottom of a stack. Heavy equipment should not be supported solely by the front- mounting locations.

1.The JBL BassQ unit has been designed to be mounted in EIA-standard racks, or stacked freestanding. If the unit is being mounted in a rack, it is recommended that its feet be removed prior to installation. If it will be stacked with other components, use the feet that came attached to the unit. This will ensure that there is sufficient space underneath so that heat can be dissi- pated effectively. Two rack ears are included with the JBL BassQ unit.

To install these rack ears, remove the two machine screws on each of the two side panels (see drawing), hold each rack ear in place, and attach it to the unit using the same two screws. Make sure that these screws are securely tightened.

2.Make sure that the unit is located in a well-ventilated, cool area. If it is installed inside a cabinet that is enclosed on all sides, the front of the cabinet must remain open to allow sufficient flow-through ventilation to avoid overheating.

3.With the help of another person to guide the unit into the rack, gently slide the JBL BassQ unit into place. Align the rack mounting holes to the rack ears of the equipment rack.

4.Starting with the bottom two screw holes and using two of the rack screws and plastic washers (if sup- plied with your rack), secure the JBL BassQ unit into the rack. It may be necessary to have a helper hold up the rear of the unit until you have started the threads of the screws.

Side view of amplifier without rack ear.

Side view of amplifier with rack ear attached.

Front view of amplifier with rack ear attached.

Once the bottom mounting screws are installed, move to the top mount- ing screws. Once done, check and tighten all four screws. Always use all four screws when mounting any equipment.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents JBL Performance Series JBL Bassq Automatic ROOM-MODE-CORRECTION Processor Important Safety Instructions Included Accessories FeaturesIntroduction and Features IntroductionOperation and Controls Power Trigger Input Jack Main Power SwitchPower Trigger Outputs Movie Trigger InputUsing the Remote Button Function Remote Control OperationTo replace the remote control batteries General Information Connecting Your JBL Performance Series SystemAV2 AVA7Physical Installation Installing the JBL Bassq ProcessorSide view of amplifier without rack ear Calibration and Room Mode Correction Troubleshooting Audio Characteristics JBL Bassq SpecificationsGeneral

BASSQ specifications

JBL Professional has long been synonymous with high-quality audio, and the JBL Professional BASSQ is no exception. This innovative product is specifically designed for audio professionals seeking to enhance low-frequency performance in live sound and studio environments. With its array of advanced features and cutting-edge technologies, the BASSQ offers an unrivaled listening experience.

One of the standout features of the BASSQ is its advanced equalization capabilities. The device is equipped with a powerful four-band EQ, allowing users to precisely shape their sound. This feature is particularly useful for tailoring bass response to suit specific environments, whether in a club, theater, or recording studio. The BASSQ's intuitive interface makes it easy for users to adjust the frequency bands, ensuring optimal performance in any setting.

At the core of the BASSQ’s design is its projection technology, which enhances low-frequency output while maintaining clarity in the mid and high ranges. This technology minimizes distortion at high volume levels, making it suitable for large venues and demanding applications. The BASSQ ensures that the bass is tight and punchy, delivering a sound that is both powerful and articulate.

In addition to its sound-shaping capabilities, the BASSQ features advanced connectivity options. Equipped with multiple input and output configurations, including XLR and TRS connectors, it integrates seamlessly into various audio setups. This versatility makes it ideal for both live performance and studio applications.

Durability is another key characteristic of the JBL Professional BASSQ. Constructed with rugged materials, it is built to withstand the rigors of both touring and permanent installation. The unit is designed to meet the demands of professional use, ensuring longevity and reliability in any environment.

Moreover, the user-friendly design of the BASSQ is complemented by LED indicators that provide real-time feedback on signal status and levels. This enhances the user experience and makes it easier for audio engineers to monitor settings during performances.

Overall, the JBL Professional BASSQ stands out as a state-of-the-art solution for professionals in the audio industry. With its powerful equalization features, advanced projection technology, robust connectivity, and durable construction, it is an essential tool for achieving superior sound quality. Whether mixing in the studio or performing live, the BASSQ offers the flexibility and performance required to elevate any audio production.
Top Page Image Contents