Calibration and Room Mode Correction

Once you have connected the sub- woofer input into the JBL BassQ unit and connected the outputs from the unit to all subwoofers in the system, you will need to run the BassQ test to finalize the room calibration and correction.

Before You Begin

It is very important that all subwoofers are on and installed before you run the BassQ process. If you move a sub- woofer or add a sub to the system, you will need to rerun the test. Set all initial settings on all attached subwoofers or subwoofer amplifiers to nominal or 0dB input level (phase set to 0°) and bypass all internal crossovers.

If Your System Includes an AV2

Before beginning any calibration, select BASSQ ->Yes from the AV2 Setup menu. This will optimize the delay settings and AV2 Autocal for use with the JBL BassQ processor. It will be necessary to manu- ally set the subwoofer output level from the AV2 processor. See the AV2 manual for details.

Step One: Microphone Setup

Begin the calibration process by setting up the microphone array to test the listening area. The JBL BassQ unit includes four microphones, four micro- phone bases and eight microphone stands. Begin by screwing together two stands to make four tall stands. Press the poles firmly into the base. The hole in the base will securely hold the stand, but you should make sure that the stand is in the base before pro- ceeding. Next, screw one microphone each into the top of the stand. Each

microphone comes with an attached cable with a 1/4" jack on the end. Plug each microphone into the front of the JBL BassQ unit, using the diagram below as a reference for placement. It is important that the microphones cover the listening area.

Step Two: Turn On All Electronics

Make sure that all electronics are on, including all subwoofers or subwoofer amplifiers. Turn down or mute the vol- ume on the preamp.

NOTE: Many self-powered subwoofers, such as the PS1400 and HTPS-400, have auto turn-on based on signal sensing.

Either turn them to On or make sure that they are on and remain on for this test. If the subwoofers are not already on, the first part of the test tone will be clipped and BassQ will not properly calibrate the room.

Step Three: Begin the BassQ Process

The first time you power up the JBL BassQ unit, the blue light will be off and the unit will be in Bypass mode. Press the BassQ button. The BassQ light will begin to blink, indicating that it has started the process. You will hear a test tone from each subwoofer, one at a time. When the process is finished, the BassQ light will be solid and the subwoofer lights will flash briefly to indicate which outputs have subwoofers attached and are calibrated. You can confirm which outputs are calibrated by placing the unit into Standby mode and then on again. The lights will go on briefly to indicate which outputs are active.

NOTE: When using an AV2, it is important to run the Autocal only after using the BassQ process and setting the BassQ setting to Yes in the AV2 setup menu. See the AV2 manual for details.

Step Four: Level Calibration of Main Speakers

Level adjustments are best done using an SPL meter that is set to C-weighting and Slow response. Set the level control on your subwoofer to 0dB or a nominal reference level. Turn on the internal noise test from the AV1 (or other processor) and, using the level control in your preamp or processor, set all speaker levels to a 75dB reference level. If using the AV2 Autocal, the levels will automatically be set. Be sure to set the AV2 to Yes for BassQ in the AV2 setup menu.

Step Five: Distance Calibration

Due to the different distances between the listening position for the subwoofer, the front channel speakers and the sur- round speakers, the amount of time it takes for sound to reach your ears from front speakers versus surround speakers differs. You may compensate for this difference through the use of the delay settings to adjust the timing for the speaker placement and acoustic conditions in your listening room or home theater. Begin by measuring the distance between your listening position and each of the speakers in your system. Write these down, as you may need to remember them in the future. If you have more than one subwoofer, it is best to place them

Subwoofer		Subwoofer
Left Front	Center	Right Front
Channel	Channel	Channel

	Left		3		Right
	Left				Right
	Surround	1	Couch	2	Surround
	Channel	1	Couch	2	Channel
				4
10	Left Rear		Right Rear
10	Surround Channel		Surround Channel
	Surround Channel		Surround Channel

an equal distance from the listening position. If this is not possible, use the distance from the closest subwoofer for the speaker distance settings. If using the AV2 Autocal, the distances will automatically be set. Be sure to set the AV2 to Yes for BassQ in the AV2 setup menu.

Step Six: Enjoy the Music

You can now disconnect all the micro- phones and pack up the stands. Keep these, in case you need to rerun the test. Unmute the preamp and enjoy.

BASSQ specifications

JBL Professional has long been synonymous with high-quality audio, and the JBL Professional BASSQ is no exception. This innovative product is specifically designed for audio professionals seeking to enhance low-frequency performance in live sound and studio environments. With its array of advanced features and cutting-edge technologies, the BASSQ offers an unrivaled listening experience.

One of the standout features of the BASSQ is its advanced equalization capabilities. The device is equipped with a powerful four-band EQ, allowing users to precisely shape their sound. This feature is particularly useful for tailoring bass response to suit specific environments, whether in a club, theater, or recording studio. The BASSQ's intuitive interface makes it easy for users to adjust the frequency bands, ensuring optimal performance in any setting.

At the core of the BASSQ’s design is its projection technology, which enhances low-frequency output while maintaining clarity in the mid and high ranges. This technology minimizes distortion at high volume levels, making it suitable for large venues and demanding applications. The BASSQ ensures that the bass is tight and punchy, delivering a sound that is both powerful and articulate.

In addition to its sound-shaping capabilities, the BASSQ features advanced connectivity options. Equipped with multiple input and output configurations, including XLR and TRS connectors, it integrates seamlessly into various audio setups. This versatility makes it ideal for both live performance and studio applications.

Durability is another key characteristic of the JBL Professional BASSQ. Constructed with rugged materials, it is built to withstand the rigors of both touring and permanent installation. The unit is designed to meet the demands of professional use, ensuring longevity and reliability in any environment.

Moreover, the user-friendly design of the BASSQ is complemented by LED indicators that provide real-time feedback on signal status and levels. This enhances the user experience and makes it easier for audio engineers to monitor settings during performances.

Overall, the JBL Professional BASSQ stands out as a state-of-the-art solution for professionals in the audio industry. With its powerful equalization features, advanced projection technology, robust connectivity, and durable construction, it is an essential tool for achieving superior sound quality. Whether mixing in the studio or performing live, the BASSQ offers the flexibility and performance required to elevate any audio production.