Husqvarna JET55S Training, II. Preparation, III. Operation, IV. Maintenance and Storage

Page 3

SAFE OPERATION PRACTICES FOR PEDESTRIAN-CONTROLLED ROTARY LAWNMOWERS

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety

instructions could result in serious injury or death.

I. Training

Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.

Never allow children or people unfamiliar with the instructions to use the lawnmower. Local regulations may restrict the age of the operator.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the operator or user is responsible for acci- dents or hazards occurring to other people or their property.

II. Preparation

While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine.

WARNING - Petrol is highly fl ammable.

-Store fuel in containers specifi cally designed for this pur- pose.

-Refuel outdoors only and do not smoke while refueling.

-Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.

-If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dis- sipated.

-Replace all fuel tanks and container caps securely.

Replace faulty silencers.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

III. Operation

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artifi cial light.

Avoid operating the equipment in wet grass, where feasible.

Always be sure of your footing on slopes.

Walk, never run.

For wheeled rotary machines, mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow excessively steep slopes.

Use extreme caution when reversing or pulling the lawnmower towards you.

Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transport- ing the lawnmower to and from the area to be mowed.

Never operate the lawnmower with defective guards, or without safety devices, for example defl ectors and/or grass catchers, in place.

Do not change the engine governor settings or overspeed the engine. Operating the engine at excessive speed may increase the hazard of personal injury.

Disengage all blade and drive clutches before starting the engine.

Start the engine or switch on the motor carefully according to instructions and with feet well away from the blade.

Do not tilt the lawnmower when starting the engine or switch- ing on the motor, except if the lawnmower has to be tilted for starting. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator.

Do not start the engine when standing in front of the discharge chute.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Never pick up or carry lawnmower while the engine is running.

Stop the engine and disconnect the spark plug wire:

-before cleaning blockages or unclogging chute;

-before checking, cleaning or working on the lawnmower;

-after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawnmower;

-if the lawnmower starts to vibrate abnormally (check im- mediately).

Stop the engine:

-whenever you leave the lawnmower;

-before refuelling.

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

Go slow when using a trailing seat.

IV. Maintenance and Storage

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Never store the equipment with petrol in the tank inside a building where fumes may reach an open fl ame or spark.

Allow the engine to cool before storing in any enclosure.

To reduce the fi re hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or deterioration.

Replace worn or damaged parts for safety.

If the fuel tank has to be drained, this should be done outdoors.

3

Image 3
Contents JET55S Contents III. Operation IV. Maintenance and StorageTraining II. PreparationIV. Wartung und Lagerung SchulungII. Vorbereitung III. BetriebIV. Entretien et Entreposage Précautions d’utilisationII. Préparation III. UtilisationIV. Mantenimiento y Almacenamiento InstrucciónII. Preparación III. OperaciónII. Voorbereiding III. BedieningIV. Onderhoud en Opslag IV. Manutenzione e Periodi di Inattivita’ Addestramento All’usoII. Preparazione III. FunzionamentoJET55S Page Griff Install Rear Foot GuardInstallez le protecteur de pieds arrière HandlePour Convertir la Tondeuse AdjustmentTo Convert Mower Umrüsten des MäweksStarting and Stopping Start und StoppMarche et Arrêt Arranque y Parada Starten en StoppenAvviamento e Arresto Funcionamiento Mise en serviceDrive LaufAplicacion UseGebrauch UtilisationInspeccion MaintenanceWartung EntretienRevisión anual Al terminar la estación Annually After end of seasonJährlich nach Beendigung der Saison Annuellement à fin de la saisonTransporto TransportTransporte Vervoer532 17 78-79 Rev 04.29.03 by

JET55S specifications

The Husqvarna JET55S is a robust and reliable chainsaw designed for both professionals and serious hobbyists looking for high performance and durability. With a focus on power, ease of use, and innovative technology, this model stands out in the competitive landscape of chainsaws.

One of the key features of the JET55S is its powerful 55cc, 2-stroke engine, which delivers impressive cutting performance while maintaining a lightweight design. The engine is engineered for optimal efficiency, ensuring strong torque and speed that make quick work of any cutting task, from felling trees to pruning branches.

The chainsaw incorporates a specialized X-Torq engine technology that reduces fuel consumption by up to 20% compared to traditional engines, making it an environmentally friendly option. Additionally, this system minimizes exhaust emissions, meeting strict environmental standards without compromising performance. Users can appreciate not only the power but also the reduced fuel costs associated with this technology.

Another notable feature of the Husqvarna JET55S is its ergonomic design. The chainsaw is equipped with an adjustable, low-vibration handle that enhances user comfort during prolonged use. The anti-vibration system significantly reduces vibrations, enabling users to work longer without fatigue. Coupled with a lightweight construction, this chainsaw allows for easy maneuverability, increasing overall efficiency.

The JET55S boasts a quick-release air filter for easy maintenance, ensuring that users can keep the chainsaw in optimal working condition with minimal effort. The easy-access chain tensioning system also allows users to adjust the chain with ease, enhancing safety and performance during operation.

Moreover, the automatic oil pump helps to keep the bar and chain lubricated during use, extending the lifespan of both components and ensuring smooth cutting performance. The saw features a front hand guard that provides added safety, protecting the user from debris while cutting.

The Husqvarna JET55S is also compatible with a range of Husqvarna accessories, making it a versatile tool for various applications. Whether you are a professional logger or a passionate gardener, the JET55S delivers exceptional reliability and performance, making it an essential addition to your toolkit.

In summary, the Husqvarna JET55S integrates powerful technology, ergonomic design, and user-friendly features to provide an outstanding chainsaw experience for users at all levels. Its advanced engine, low vibration, and easy maintenance options underline Husqvarna's commitment to quality and innovation in outdoor power equipment.