Checklist

ASSEMBLY

				FRONT
	DOUBLE LOOP			SUSPENSION
CHASSIS	DOUBLE LOOP	SUSPENSION ARMS		BRACKETS
CHASSIS	RETAINER SPRING
BRACKET	(Inward pointing deck pins)	FRONT		ELECTRIC
	(Inward pointing deck pins)			ELECTRIC
				CLUTCH
		MOWER	FRONT	CLUTCH
		MOWER	FRONT	PULLEY
		BRACKET	LINK

GAUGE

WHEEL

SINGLE LOOP

RETAINER

SPRINGS

DOUBLE

LOOP

RETAINER ANTI-SWAY

SPRINGBAR

USE PLIERS FOR

RETAINER SPRINGS

DEFLECTOR

SHIELD

IDLER

PULLEY

LOOP DOWN

FIG. 6

BEFORE YOU OPERATE!AND ENJOY YOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST: All assembly instructions have been completed. No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

Seat is adjusted comfortably and tightened securely.

All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure

!and wires are properly clamped.

Before driving tractor, be sure freewheel control is in drive position.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded gasoline.

Become familiar with all controls - their location and function. Operate them before you start the engine.

Be sure brake system is in safe operating condition.

!It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Opera- tion section of this manual).