Hubbell 670-801-UL manual Confidentiality Notice, Introduction, How to Use the Assembly/Model

Page 1

Pub. 42004-615L2

G AI - T RO NI CS® CO RPO RAT I O N

A H U B B E L L C O M P A N Y

Model 670-801-EX and 670-801-UL

SmartSeries Amplifiers

for CENELEC Zone 1 and UL Div. 1

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.

Introduction

The assembly described in this manual is an explosion-proof enclosure and intelligent speaker amplifier designed to be installed in hazardous areas where combustible gases exist or may exist. The extra thick cast aluminum enclosure, while not gas tight, is designed to withstand repeated internal explosions without expelling gases hot enough to ignite the external atmosphere. This is accomplished through the use of a precision-machined enclosure opening flame path that cools the exiting gases to a temperature below the flash point of the external, explosive atmosphere.

How to Use the Assembly/Model

Application

The hazardous area SmartSeries amplifier is designed to provide clear communications even in high noise areas where explosive atmospheres exist or may exist.

The Model 670-801-EX is BASEEFA approved to CENELEC Standards Ex dib for Zone 1, Group IIC T5.

The Model 670-801-UL is approved by Underwriters Laboratories for:

Class 1, Div. 1, Groups C and D

Class II, Div. 1, Groups E, F, and G

Class III, Div. 1

The intelligent SmartSeriesamplifier is designed for use on the GAI-Tronics single party or multi-party system cable. It includes micro-controllers that are programmed to:

Receive and send data messages on the system cable

Measure ambient noise and adjust speaker level

Monitor and control optional external equipment

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Image 1
Contents Confidentiality Notice How to Use the Assembly/ModelIntroduction ApplicationModel 670-801-EX/UL SmartSeries Amplifier Hardware ConfigurationModel 670-801-UL Top and Bottom Views ExternalChassis Gasket InternalBlock Diagram ACH InterfacesMounting InstallationUL Version Wiring Detail Operation AdjustmentsInternalAdjustments Troubleshooting MaintenanceSoftware Configuration 95% non-condensing SpecificationsReference to Assembly/Model Drawings Replacement PartsReference Material Return Policy Warranty