| Pub. |
Model | Page: 14 of 15 |
Specifications
Electrical
Voltage | 90 to 140 V ac (120 V ac nominal) 50/60 Hz | |
Power consumed | Zero/maximum signal (12 watts): 15 VA, 10.5 watts/ 53 VA, 34 watts | |
SpeakerAmplifier |
|
|
Output | 12 watts minimum, with nominal supply voltage | |
Output limiter | 2.16 Vpeak (adjustable via configuration) | |
Voltage Gain | 26 dB maximum, adjustable | |
Frequency Response | ||
Distortion | 1% max. THD @ 1 kHz, 12 watts | |
Input Impedance | 50 | |
|
| 16 |
Audio input from line | 1.5 Vrms nominal (depends on distance) from 33 ohm | |
FSKModem |
|
|
FSK output to line | 0.7 Vrms, 2 | |
FSK frequency range | ||
SmartVolume™ |
|
|
Dynamic range (low gain) | 62 to 100 dBA SPL | |
Frequency characteristics | 630 Hz LPF | |
Offset (above ambient) User Level Adjust | ...............................................................................0 to 25 dB | |
Minimum user adjust | Off; 85 to 125 dBA SPL | |
Speaker/WireMonitor |
|
|
Dynamic range (high gain) | 27 to 65 dB SPL | |
Frequency characteristics | 630 Hz LPF | |
Fault setpoint | 35 dB SPL (adjustable via configuration) | |
|
| Note: The measured SPL varies for each speaker type. |
Recommended environment | Greater than 50 dB SPL | |
Mechanical |
|
|
Dimensions | 14.4 H ⋅ 14.4 W ⋅ 7.83 D inches (367 ⋅ 367 ⋅ 199 mm) overall | |
Enclosure material | LM25TF, Epoxy | |
Internal controls | Line level | |
Environmental |
|
|
Operating and storage temperature range | ||
Humidity | 95% | |
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr.