Husqvarna EZ5224BF / 966495901, EZC4824BF / 966047501, EZ5224 / 966038301 manual Introduction

Page 5

INTRODUCTION

Congratulations

Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator’s manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator’s manual along when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on the towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop.

Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer's recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

5

Image 5
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and decalsSymbols and decals Safety Instructions SafetyNever take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Control Locations ControlsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Always raise the deck to the highest position for transport Cutting Height AdjusterFuel Shut Off Valve Tracking Knob Seat Adjustment LeverHour Meter Steering TrainingStarting the Engine Before StartingPlace controls in neutral position Turn to the start position Connect one end of the Black cable to Weak BatterySecure selected cutting height RunningSet blade engagement and throttle control Operating On HillsMowing Tips Stopping the Engine ZT-2800 Bypass Linkages Manual TransportMaintenance Schedule MaintenanceInterval Daily Once Hours Replacing battery BatteryFuel Filter Safety SystemTire Pressures Fuel Pump Air FilterDeck Belt Removal Deck Belt InstallationBelts Belt removal Belt installationPump Belt Replacing pump belt Cutting Blades Leveling deck Adjusting the Mower DeckAnti-Scalp Rollers Use protective glasses when cleaning and washing CleaningCaster Wheels HardwareGeneral LubricationFront Wheel Bearings Front Wheel MountDeck Spindle Deck Outer SpindleTransaxle Transmission Fluid Change Purging Problem Cause TroubleshootingTroubleshooting Winter Storage ServiceStorage Schematics Torque Specifications Technical DataAccessories Transmission EZ4824K EZC4824 BF EngineEZ4824 EZC4824 BF Frame DimensionEZ5224 EZ5224BF Engine EZ5224 EZ5224BF Frame CE requirements USA requirementsAction Date, mtr reading, stamp, sign Delivery ServiceAfter the first 5-8 hours Hour ServiceService Journal At Least Once Each Year Service Journal Service Journal Service Journal Page Page 115 387527R1 06/01/10