Husqvarna YTH2546 owner manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 6

ASSEMBLY

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

•Sit on seat in operating position, depress brake pedal and set the parking brake.

•Raise attachment lift lever to its highest position.

•Remove key from bag and start the engine (see "TO START" in the Operation section of this manual). After engine has started, move throttle control to idle (slow) position.

•Release parking brake.

•Slowly depress forward drive pedal and drive tractor off skid.

•Apply brake to stop tractor and set parking brake.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before op- erating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents YTH2546 Twin General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingSystem Characteristics To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerTo Operate on Hills Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelTo Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips General Recommendations MaintenanceMaintenance ScheduleBrake Operation BatteryTractor TiresEngine Cleaning IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig Service and Adjustments To Level Mower To Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check Brake Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs See Fig To Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Fig To Remove CABLES, Reverse OrderTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Decals Wheels and TiresKEY Part NO. no Description Schematic 02929-194276Regulated-TexElectrical 102 104 101KEY Part Description Chassis KEY Part NO. no Description Drive 532 41 Spark Arrester KIT EngineSteering Assembly Mower Deck 532 41 Mower Housing Seat Assembly Mower Lift Service Notes Suggested Guide for Sighting Slopes for Safe Operation 532 41 06-05 Rev 05.10.07 AP

YTH2546 specifications

The Husqvarna YTH2546 is a versatile and powerful riding lawn mower designed for homeowners who seek reliability, performance, and ease of use in maintaining their lawns. With a robust 25 HP Kohler engine, this mower delivers exceptional power and efficiency, allowing users to tackle even the most challenging terrain with ease. The engine is engineered for smooth operation, ensuring a quiet ride while providing ample power for cutting grass at varying heights.

One of the standout features of the YTH2546 is its 46-inch cutting deck, which provides a wide cutting path, significantly reducing the time spent mowing larger lawns. The cutting deck is made from durable steel, enhancing its longevity and resistance to wear and tear. Additionally, the mower features a reinforced cutting deck with anti-scalp wheels, allowing for a clean cut and enhanced maneuverability while preventing damage to the lawn and the mower itself.

The YTH2546 incorporates a simple but effective cutting height adjustment system that allows users to quickly modify the cutting height to their preferred level, ranging from 1.5 to 4 inches. This flexibility enables homeowners to achieve the perfect grass height, promoting a healthy and well-maintained lawn. The mower also boasts a unique automatic blade engagement feature, which allows the operator to easily engage and disengage the blades using a simple lever, enhancing overall user convenience.

For added comfort, the Husqvarna YTH2546 is equipped with an ergonomic seat that is designed to provide ample cushioning during longer mowing sessions. The seat is adjustable to accommodate different operator sizes, ensuring a comfortable fit. Additionally, the controls are intuitively located, ensuring that users can easily navigate the mower without unnecessary distractions.

Another notable technology in the YTH2546 is its hydrostatic transmission. This system offers seamless speed control, allowing users to move forward or backward with the appropriate speed without the need for gear shifting. The result is improved control and reduced operator fatigue, making mowing more enjoyable.

In summary, the Husqvarna YTH2546 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. With its reliable engine, robust cutting deck, and innovative technologies, this riding lawn mower ensures a clean, precise cut while delivering unparalleled comfort and convenience.
Top Page Image Contents