Husqvarna ZEKW42170, ZEKW52210 manual By pass linkage, Fuses

CONTROLS

6. By pass linkage

When pushing or pulling the mower, be sure to engage the IZT (Integraded Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.

•Raise the deck into the highest cutting position.

•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.

•To re-engage the IZT’s to drive, reverse the above procedure.

CZ10-2

1. IZT Bypass linkage Bypass linkages

1

2

CZ12

1.Head outside of rear deck

2.IZT Bypass linkage in bypass position

Bypass position

7. Fuses

The fuses are located in a holder at the right hand side of the battery compartment. They are flat pin fuses of the same type used in automobiles.

There are two fuses.

Fuse ratings and functions:

• 20 A, Primary fuse.

•7.5 A, Mower deck coupling.

8011-483

Fuses

English-20