Husqvarna ZEKW42170, ZEKW52210 manual USE Full Throttle When Mowing

Page 30

OPERATION

10.When the engine starts, immediately release the ignition key back to the run position.

IMPORTANT INFORMATION

Do not run the starter for more than

5 seconds each time. If the engine does not start, wait about 10 seconds before re- trying.

8011-743

Return to run position

11.Press the choke control in gradually when the engine has started.

12.Set the desired engine speed with the throttle.

Allow the engine to run at a moderate speed, “half throttle”, for 3-5 minutes before loading it too heavily.

USE FULL THROTTLE WHEN MOWING.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8011-756

Gradually press in the choke control

8011-763

Set the engine speed

English-28

Image 30
Contents Operator’s manual Models Page Contents OPERATOR’S Manual ZE RiderEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Controls ControlsParking Brake Motion Control LeversMachine must be stopped before activating the parking brake Seat adjustment bolts TrackingFuel Shut Off Valve Refueling By pass linkage FusesIgnition Switch Hour MeterChoke Control Blade switch Throttle ControlAccessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Nance Once Each Maintenance Before After 100 Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting the Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Replacing the Air Filter Kawasaki Engine Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Checking the V-belts Faulty adjustment can cause an accidentChecking the Parking Brake Deck beltDeck belt installation To replace IZT Integraded Zeroturn Transaxle belt Belt installationIZT belt IZT belt removalChecking the Blades Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightLeveling To adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsMower is tracking to the right Tracking adjustmentTo adjust parking brake Mower is tracking to the leftLubrication Schedule LubricationLubrication Change transaxles transmission filtersFront Wheel Mount Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Engine Oil Filter Transaxle Transmission Fluid ChangeExpansion Tank Purging Procedures Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-60 English-61 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataZEKW42170/968999295 ZEKW52210/968999296 Productivity Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Delivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 English-76 English-77