Canon 1100HS manualTrimming

134
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
zTouch H, then n to choose the
1 tab, and touch [Trimming].
Choose an image.
zDrag across the screen to choose an
image, then touch [OK].
Adjust the trimming area.
XA frame will appear around the portion of
the image to be trimmed.
XThe original image will display in the upper
left and the trimmed image will display in
the lower right.
zIf you move the zoom lever, touch
or the image on the lower right of the
screen, you can change the frame size.
zIf you drag on the image at the upper left or
the image on the lower right, you can move
the frame.
zIf you touch , you can change the frame
orientation.
zIn an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by touching .
zTouch [New File].
XThe [Save new image?] screen will
appear.
Save as a new image and display.
zFollow Steps 4 and 5 on p. 133.
Trimming
Trimming Area
Trimming Area Display
Recorded pixels
after trimming