Canon 1100HS Checking Connection Information, Disabling Eye-Fi Transfer

Using an Eye-Fi Card
176
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
zTouch H, then n to choose the
3 tab, and touch [Eye-Fi Settings].
zTouch [Connection info], then touch
[Connection info] again.
XThe connection info screen will appear.
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
zTouch H, then n to choose the
3 tab, and touch [Eye-Fi Settings].
zChoose [Eye-Fi trans.], then touch qr to
choose [Disable].
•The power saving function does not work while transferring images
(p.50).
•Choosing mode will interrupt the Eye-Fi connection. Choosing
another Shooting mode or entering Playback mode will reopen the Eye-
Fi connection, but movies made with mode may be transferred again.
Checking Connection Information
Disabling Eye-Fi Transfer
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the
camera, and when an Eye-Fi card’s write-protect tab is in the locked position. For
this reason, settings cannot be changed for Eye-Fi cards equipped with a write-
protect tab when the tab is in the locked position.