Panasonic 103PF12U Setup of SCREENSAVER Time

SCREENSAVER
START
FUNCTION
MODE
FINISH TIME
START TIME
SCROLLING BAR ONLY
TIME OF DAY
6:15
12:30
PRESENT TIME OF DAY 15:00
SCREENSAVER
START
FUNCTION
MODE
SAVER DURATION
SHOW DURATION
SCROLLING BAR ONLY
INTERVAL
12:00
3:00
PRESENT TIME OF DAY 15:00
SCREENSAVER
START
FUNCTION
MODE
SCREENSAVER DURATION
SCROLLING BAR ONLY
STANDBY AFTER SCR SAVER
6:15
PRESENT TIME OF DAY 15:00
38
SCREENSAVER (For preventing image retention)
Setup of SCREENSAVER Time
After selecting TIME OF DAY, INTERV AL or ST ANDBY AFTER SCR SA VER, the relevant T ime Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME (when TIME OF
DAY is selected).
Press to select SHOW DURATION / SAVER DURATION
(when INTERVAL is selected).
Press to select SCREENSAVER DURATION (when
STANDBY AFTER SCR SAVER is selected).
Press to setup.
button: Forward
button: Back
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “SCREENSAVER DURATION” of the “STANDBY AFTER SCR SA VER” can
be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER
SCR SAVER” will not be activated.