Panasonic 103PF12U SYNC, SDI THROUGH, Input signal display

SYNC

SIGNAL [ RGB ]

3 : 2 PULLDOWN

XGA MODE

AUTO

OFF

AUTO

SYNC AUTO

SYNC ON G

SYNC VBS

H-FREQ.

V-FREQ.

kHz

Hz

63.98

60.02

SIGNAL FORMAT 1280×1024/60

H-FREQ.

V-FREQ.

kHz

Hz

63.98

60.02

DOT CLOCK FREQ.

MHz108.0

SIGNAL FORMAT 1280×1024/60

3 : 2 PULLDOWN

SIGNAL

OFF

SDI THROUGH OFF

[ Digital ]

NOISE REDUCTION OFF

REFRESH RATE 100 Hz

54

SET UP for Input Signals

Select SIGNAL from the “SET UP” menu during RGB input signal.

SYNC

Setting RGB sync signal

Conﬁ rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal).

AUTO: The H and V sync or synchronized signal are automatically selected.

If both input, it is selected the H and V sync.

ON G: Uses a synchronized signal on the Video G signal, which is input from

the G connector.

VBS: Uses a synchronized signal of Composite Sync input, which is input

from the HD connector.

Displays the frequency and the type of the current input signal.

This display is valid only for COMPONENT/RGB/PC and Digital input signal.

Display range:

Horizontal 15 - 110 kHz

Vertical 48 - 120 Hz

The dot clock frequency is displayed during digital signal input.

Input signal display

Press to select the “SYNC”.

Press to adjust.

Press to select the “SDI THROUGH”.

Press to select “ON” or “OFF”.

ON: Enables active through.

OFF: Disables active through.

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).

Note:

Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB1 1DHD)

is selected.

SDI THROUGH

Contents

Main CAUTION Important Safety Instructions Table of Contents Dear Panasonic Customer FCC STATEMENT Safety Precautions CAUTION When using the Plasma Display Safety Precautions Maintenance WARNING Setup AC Power Supply Cord If problems occur during use Accessories Precaution on battery use Accessories Supplied Check that you have the Accessories and items shown Remote Control Batteries Connections AUDIO OUT Terminals connection PC Input Terminals connection SERIAL Terminals connection HDMI connection DVD DVD player DVD player HDMI cables [Pin assignments and signal names] Power ON / OFF Power ON / OFF Selecting the input signal Basic Controls Main Unit Basic Controls Remote Control Transmitter ASPECT Controls ASPECT Controls MULTI PIP MULTI PIP SETUP Selecting the Display Mode ASPECT Controls MULTI PIPMULTI PIP Swapping Screens MULTI PIP Selecting the Target Screen for Operations Operations on the main screen Operations on the sub screen Selecting the Sub Screen Position (During P IN P Display) Digital Zoom 1 On-Screen Menu Displays Remote Control Unit 1 2 3 On-Screen Menu Displays Overview POS. /SIZE (see page 25-27) (see page 36-54) Adjusting POS. /SIZE 1 Page Adjusting POS. /SIZE PICTURE Adjustments PICTURE Adjustments ADVANCED SETTINGS Picture Pro les Saving pro les 1 2 3 4 5 1 Loading pro les 2 1 2 3 4 1 2 3 4 Editing pro les 1 2 3 4 6 Locking pro les 1 2 3 4 5 1 2 3 4 SOUND Adjustment 1 A 2 NORMALIZE PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP SET UP TIMER FUNCTION selection MODE selection SCREENSAVER SCREENSAVER (For preventing image retention) Setup of SCREENSAVER Time EXTENDED LIFE SETTINGS Reduces screen image retention Reduces screen image retention EXPRESS SETTINGS 1 2 3 Reduces screen image retention CUSTOM SETTINGS 1 2 3 4 5 1 2 3 Reduces power consumption Customizing the Input labels Selecting the On-Screen Menu Language DISPLAY ORIENTATION How to setup MULTI DISPLAY SET UP for MULTI DISPLAY 3 SET UP for MULTI DISPLAY ID Remote Control Function ID Cancellation ID remote control button operation MULTI PIP SETUP 3 Sub Screen Insertion (During BLEND PIP) Transparent Display of the Sub Screen (During BLEND PIP) MULTI PIP SET UP for PORTRAIT How to setup PORTRAIT SET UP for PORTRAIT AI-SYNCHRONIZATION VIEWING AREA / LOCATION SET UP for Input Signals COMPONENT / RGB IN SELECT YUV / RGB IN SELECT 1/2 COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SIGNAL menu For VIDEO (S VIDEO) 3D Y/C FILTER When ON, this setting only affects NTSC input signals. Press to select the 3D Y/C FILTER (NTSC). Press to set ON / OFF. 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO XGA MODE REFRESH RATE NOISE REDUCTION Advanced NR SYNC Setting RGB sync signal SDI THROUGH Input signal display Options Adjustments Press to display the SET UP menu. Page Page Options Weekly Command Timer 1/3 Memory lock Weekly Command Timer Program number Press to select a day. Press to select a program number. You can set the program from 1 to 7. --- indicates unset. Press ACTION ( ) button Shipping condition Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Plasma Display panel Symptoms Check List of Aspect Modes Applicable Input Signals Applicable Input Signals Command list of Weekly Command Timer on the unit or enter the command VMT:0 to unlock Picture Mute. Speci cations (for the U.S.A and Puerto Rico) LIMITS AND EXCLUSIONS In the USA and Puerto Rico FOR SERVICE CALL TOLL FREE 1-800-973-4390 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED WARRANTY STATEMENT (for Canada)