Connections
Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality
1.Using an optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the product to the DIGITAL AUDIO IN (OPTICAL) terminal of your AV receiver.
2.Using the video signal cable(s), connect the HDMI, COMPONENT, or VIDEO OUT terminals on the rear of the product to the HDMI, COMPONENT, or VIDEO IN terminal of your TV. (See pages 24~26)
3.Turn on the product, TV, and AV receiver.
4.Press the input select button of the AV receiver to select the external input in order to hear sound from the product. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.
5.Press the input selector on your TV remote control to select the video source (HDMI, Component or Video.)
Case 2 : Optical cable(not included)
1.Using the audio cables, connect the AUDIO OUT (white and red) terminals on the rear of the product to the AUDIO IN (white and red) terminals of your Stereo Amplifier.
2.Using the video signal cable(s), connect the HDMI, COMPONENT, or VIDEO OUT terminals on the rear of the product to the HDMI, COMPONENT, or VIDEO IN terminal of your TV. (See pages 24~26)
3.Turn on the product, TV, and Stereo Amplifier.4.Press the input select button of the Stereo Amplifier to select the external input and hear sound from the product. Refer to your Stereo Amplifier's user manual to set the Stereo Amplifier's audio input.
5.Press the input selector on your TV remote control to select the video source (HDMI, Component or Video.)
Case 3 : Audio cableRed White
✎✎NOTE
`` If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output setting as PCM.