Samsung BD-D6900 BD-D6900/EN, BD-D6900/XN, BD-D6900/ZF PCM Downsampling, Dynamic Range Control, Downmixing Mode, Setup, Any, ✎✎NOTE, 40 English, If the Source Stream is 2ch or mono

Setup

				Decodes the main	Decodes the main
			Outputs only the main		feature audio and
		Decodes the main feature		feature audio and	BONUSVIEW audio
			feature audio stream so that	BONUSVIEW audio	stream together
Definition for		audio and BONUSVIEW	your AV receiver can decode	stream together	into PCM audio and
	Any			into PCM audio and
Blu-ray Disc		audio stream together	the audio bitstream.	adds Navigation	adds Navigation
		into PCM audio and adds	You will not hear		Sound Effects,
				Sound Effects, then
		Navigation Sound Effects.	BONUSVIEW audio or	re-encodes the	then re-encodes
			Navigation Sound Effects.	PCM audio into DTS	the PCM audio
				bitstream.	into Dolby digital
					bitstream.

*If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.

**If HE-AAC Source Stream is 2ch or 1ch, Output shall be 2ch PCM.

For Dolby Digital Plus stream on Internet Content, PCM Output via HDMI supported up to 5.1ch.

***If the Audio Description is set to On and the Number of Audio Channel is more than 2, audio output will be changed Dolby Digital even if the original broadcast stream is Dolby Digital Plus.

But, if the Number of Audio Channel is 2 (stereo) or 1 and Audio Description is set to On, Output format will be PCM.

PCM Downsampling

Lets you set 48kHz and 96kHz PCM down- sampling on or off.

• Off : Select when the AV receiver connected to the product is 96kHz compatible.

• On : Select when the AV receiver connected to the product is not 96kHz compatible. 96kHz signals will be down converted to 48kHz.

✎✎NOTE

`` Even when PCM Downsampling is set to Off, some discs will only output downsampled audio through the optical digital outputs.

HDMI

•If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the product may output PCM 2ch downmixed audio even though you set the digital output as Bitstream (unprocessed/Re-encoded DTS/Re- encoded Dolby D) on your setup menu.

•If your TV is not compatible with PCM sampling rates over 48kHz, the product may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.

Dynamic Range Control

You can listen at low volumes, but still hear dialog clearly.

This is only active if your product detects a Dolby Digital, Dolby Digital Plus or Dolby TrueHD signal.

•Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.

•Off : You can enjoy the movie with the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or through smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

Downmixing Mode

Lets you select how the product will downmix multi-channel audio into fewer channels.

• Normal Stereo : Downmixes the multi-channel audio into two channel stereo. Choose when connected to equipment that does not support virtual surround functions such as Dolby Pro Logic.

• Surround Compatible : Downmixes multi- channel audio into surround compatible stereo. Choose when connected to equipment that supports virtual surround functions such as Dolby Pro Logic.

40 English