DTV View |
|
|
|
| ||
| Output | HDMI connected | HDMI not connected | |||
Resolution | HDMI Mode | Component/ | Component Mode | VIDEO Mode | ||
| ||||||
| VIDEO MODE | |||||
|
|
|
|
| ||
| BD Wise | 1080p | 576i/480i | - | - | |
| DTV Smart Resolution | Resolution of |
|
|
| |
Auto | “Auto” | Broadcast stream | 576i/480i | - | - | |
DTV Smart Resolution | Max Resolution of | |||||
|
|
|
| |||
| “Off” | TV input |
|
|
| |
| 1080p | 1080p | 576i/480i | - | - | |
| 1080i | 1080i | 576i/480i | 576p/480p | 576i/480i | |
| 720p | 720p | 576i/480i | 576p/480p | 576i/480i | |
| 576p/480p | 576p/480p | 576i/480i | 576p/480p | 576i/480i | |
| 576i/480i | - | - | 576i/480i | 576i/480i |
Setup 05
✎✎NOTE
`` DTV smart resolution is activated only when resolution option is set to Auto.
`` If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears.
If you select Yes, the TV’s screen will go blank for
15 seconds, and then the resolution will revert to the previous resolution automatically.
`` If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the STOP ( ) button on the front of the product for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.
`` When the factory default settings are restored, all stored user BD data is deleted.
`` The
`` If both HDMI and Component jacks are connected and you are currently viewing Component output, the resolution is fixed to 576i/480i.
`` For Copy protected DivX content, the ouput resolution of component Video is forced to 576i/480i.
`` When the HDMI cable is not connected and video output is component mode, DivX contents with copy protection can only be output 576i/480i.
DTV Smart Resolution
Use this function to automatically optimised screen resolution for digital broadcasts.
•Auto : Screen resolution is automatically optimised for digital broadcast.
•Off : Turn off DTV Smart Resolution.
✎NOTE✎
`` When you change your TV channel with this function set to Auto, according your TV, the display time of next channels may take longer than the function set to Off.
HDMI Colour Format
Lets you set the colour space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc).
•Auto : Automatically sets the product to the optimum format supported by your device.
•YCbCr (4:4:4) : If your TV supports the YCbCr colour space via HDMI, select this to output the normal YCbCr colour gamut.
English 37