Samsung Blu-ray Player J5900 BD-J5900 Settings, Wireless Network, The Setup Procedure, Menu Navigation, ✎✎ NOTES, ✎✎ NOTES, Confirm a setting, v(Enter) / DIRECTION Button :

Wireless Network

Settings

Wireless Router

Broadband service

✎✎ NOTES

`` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless network.

`` Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported. `` The player supports only the following wireless security key protocols:

-WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

`` Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

`` If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification specifications.

`` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

The Setup Procedure

•• The Home screen will not appear if you do not configure the setup.

•• The OSD (On Screen Display) may change in this player after you upgrade the software version.

•• The access steps may differ depending on the menu you selected.

•• After the setup process is complete, you can then operate the panel buttons and remote control.

After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Setup screen appears on the TV. The Setup procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network.

✎✎ NOTES

`` The Home menu will not appear if you do not configure the setup except as noted below.

`` If you press the BLUE (D) button during network setup, you can access the Home menu even if the network setup is not completed yet.

`` When you return to the Home menu, the full screen mode is cancelled automatically.

`` If you want to display the Initial Setting screen again to make changes, press the ^ button on the front panel of the player for more than 5 seconds with no disc inserted. This resets the player to its default settings.

`` After the setup process is complete. you can operate the HDMI-CEC function.

`` If you want to use the Anynet+(HDMI-CEC) function to aid in the initial set up process, please follow the instructions below.

1)Connect the player to an Anynet+(HDMI- CEC) compliant Samsung TV using HDMI Cable.

2)Set the Anynet+(HDMI-CEC) feature to On in both the TV and the player.

3)Set the TV to the Setup Procedure.

`` If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power will automatically turn off.

Menu Navigation

AUDIO HOME SUBTITLE

1

3

24

1	menu.HOME Button : Press to move to the Home
2	RETURN Button : Return to the previous menu.
	v(Enter) / DIRECTION Button :
3	Move the cursor or select an item.
	Activate the currently selected item.
	Confirm a setting.
4	EXIT Button : Press to exit the current menu.

10