Samsung Blu-ray Player J5900 BD-J5900 PCM Downsampling, Dynamic Range Control, Downmixing Mode, Configuring Your Network Connection, Wired Network, Network Settings, ĞĞWired - Automatic

✎✎ NOTES

`` Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

`` If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

`` Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

`` Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

`` If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

`` If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected Bitstream (either Re- encoded or Unprocessed) in the setup menu.

`` If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.

PCM Downsampling

Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96KHz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio.

•• Auto : Automatically controls the dynamic range of Dolby TrueHD audio, based

on information in the Dolby TrueHD soundtrack.

Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.

•• Off : Leaves the dynamic range uncompressed, letting you hear the original sound.

•• On : Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the player downmix to normal stereo or to surround compatible stereo.

Network Settings

To begin setting up the network connection for your player, follow these steps:

111In the Home menu, press the ▲▼ ◄► buttons to select Settings, and then press the v button.

222Press the ▲▼ buttons to select Network, and then press the v button.

333Press the ▲▼ buttons to select Network Settings, and then press the v button.

444Press the ▲▼ buttons to select Network Type, and then press the v button.

555Press the ▲▼ buttons to select Wired or Wireless, and then press the v button.

666Go to the next section.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.

If you are connecting to a wireless network, disconnect any wired network connection before you begin.

To begin configuring your network connection, follow these steps:

Wired Network

ĞĞWired - Automatic

111In the Home screen, select Settings, and then press the v button.

222Select Network, and then press the v button.

333Select Network Settings, and then press the v button.

444Select Wired in the Network Settings screen, and then press the v button.

555Select Connect button, and then press the v button. The product detects the wired connection, verifies the network connection and then connects to the network.

ĞĞWired - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:

111Select Network Status. The player searches for a network, and then displays the connection failed message.

222On the bottom of the screen, select IP Settings, and then press the v button. The IP Settings screen appears.

333Select the IP Setting field, and then press the v button.

444Select Enter manually in the IP Setting field, and then press the v button.

555Select a value to enter (IP Address, for example), and then press the v button. Use the number keypad on your remote control to enter the numbers for the value. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.

666Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 5.

777Repeat Steps 5 and 6 until you have filled in all values.

✎NOTES✎

`` You can get the Network values from your Internet provider.

888When finished entering all the values, and then press the RETURN or EXIT buttons. The player verifies the network connection and then connects to the network.

13