C h a p t e r 2
CO N N E C T I O N S
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.
Connecting to a TV (SCART)-Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player to the SCART(IN) terminal of your TV.
-If your TV is not equipped with a SCART you can select one of the following alterative connections:
Connection to a TV (Video CVBS)1
Using video/audio cables, connect the | VIDEO (yellow)/AUDIO |
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of your
TV.
Connections
2
Turn on the DVD player and TV.
RED
RED
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
WHITE YELLOW
Audio Cable Video Cable
WHITE
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
-The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.
-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.