Samsung REPRODUCTOR DVD P390 DVD-P390/MEA, DVD-P390/XEC connections, English _9, Choosing a Connection, Note, Connection to a TV (For Video), Before Connecting the DVD Player

connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components you are connecting for more information on those particular components.

CONNECTIONS ●

Connection to a TV (For Video)

1

Using video/audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT terminals on the rear of the

DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

2

Turn on the DVD player and TV..

3

Press the TV/VIDEO button on the TV's remote control to select Video.

Note

WHITE
RED
		YELLOW
	Audio	Video
	Cable	Cable
RED	WHITE	YELLOW

-Noise may be generated if the audio cable is too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 12 to 13)

-The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (P-SCAN ➝ I-SCAN).

English _9