Playing a Disc
Before Play-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote con- trol.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press π/† button and then press ENTER button. (This screen will only appear when you plug in the player for the first time.)If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the
English
ﺔﻳﺑﺮﻋ
Playback1.Press the OPEN/CLOSE () button.
2.Place a disc gently into the tray with the disc’s label facing up.
3.Press the PLAY/PAUSE (
Press the STOP () button during play.
Press the OPEN/CLOSE () button.
6.Pausing PlayPress the PLAY/PAUSE () on the remote control during play.
-Screen stops, no sound.
To resume, press the PLAY/PAUSE ( ) button once again.
7.Step Motion Play (Except CD)Press the SKIP ( ) button on the remote control during PAUSE mode.
-Each time the button is pressed, a new frame will appear.
-No sound is heard during STEP mode.
-Press the PLAY/PAUSE ( ) button to resume normal play.
-You can only perform step motion play in the forward direction.
8.Slow Motion PlayPress the SEARCH (
during PAUSE mode.
-No sound is heard during slow mode.
-Press the PLAY/PAUSE (
Note
-If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
-If the player is left in the stop mode for more than about 30 minutes, the power will automatically shut off.(Automatic