Samsung DW60J9970BB/EF Setting up your dishwasher, Reset, 11 Start, 10 Delay Start

Setting up your dishwasher

Delay a cycle for up to 24 hours in one-hour increments. To increase the delay start time, press or hold the Delay Start button. The hour displayed indicates the time at which the wash will be started.

10 Delay Start	- After setting the delay time, press the Start button, and then close the
	door to start the cycle.

-If you want to change the delay time once the dishwasher has started, press the Reset button and turn off the dishwasher. Then, turn on the dishwasher again and select a new cycle with a new delay setting.

	To start a cycle, press the Start button before closing the door.
	*Reset : To cancel a currently running cycle and drain the dishwasher, press
11 Start	and hold the Start button for three (3) seconds.
	Once the dishwasher is reset, select a cycle and option, and then press Start
	to restart the dishwasher.

You can select options (Self Clean, Upper, Lower, Speed Booster, Sanitize, Dry+, Delay Start) before starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.

To prevent the touchpad from losing response sensitivity, follow these instructions:

•Touch the center of each keypad using one fi nger. Do not push.

•Clean the touch control’s surface regularly with a soft, damp cloth.

•Be careful not to touch more than one touch key pad at a time, except as directed.

English - 14

User Manual_DW9000H-Series-00156A-04_EN.indd 14 2015-03-24 ￿￿ 5:18:22