This function is used when the photographer would also like to be in the picture.
- Selecting a |
|
|
|
| |
When you press the ‘shutter’ button, the picture |
| DOUBLE |
will be taken after the specified time has |
| 2 SEC |
elapsed and the |
| 10 SEC |
| OFF | |
- Selecting a remote mode : |
|
|
|
| |
Pressing the shutter button of a separate remote |
|
|
control will allow an interval of 2 seconds before |
|
|
the image is taken. After taking a picture, the |
|
|
remote mode will be maintained. |
|
|
But, pressing the Power button will cancel the remote mode. |
|
|
Icon | Mode | Description |
|
|
|
| OFF | You can not use the |
|
|
|
| 10 SEC | Pressing the shutter button will allow an interval of |
| 10 seconds before the image is taken. | |
|
| |
|
|
|
| 2 SEC | Pressing the shutter button will allow an interval of |
| 2 seconds before the image is taken. | |
|
| |
|
|
|
| DOUBLE | A picture will be taken after about 10 seconds and |
| 2 seconds later a second picture will be taken. | |
|
|
|
| MOTION | The camera detects the subject’s movement 6 seconds |
| after pressing the Shutter button, and the picture is | |
| TIMER | |
| taken when the movement is stopped. | |
|
| |
| REMOTE | You can take a picture by remote control instead of |
|
| using the shutter button of the camera. |
When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range.
[Shutter button on the
remote control]
■Replacing battery for the remote controlMake sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre.
Use the CR 2025 3V battery.
● When taking a picture using the
10 second
The
2 second
The
●If you operate the Back button during the
●Use a tripod to prevent camera shake.
<<39>>