Image Adjust
Saturation control
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly
You can change the saturation of the image.
1.Press the [SATURATION] menu button.
2.Use the Smart button to adjust Saturation as desired.
3.After the message [Processing!] is displayed, the corresponding effect is applied.
4.Press the OK button to save the changed image under a new filename.
SATURATION
CONTRAST
BRIGHTNESS
ACB
RED EYE FIX
Movie clips and voice files cannot be printed.
■Setting up the camera for connection to a printer
1. Connect the camera to a printer’s USB port with |
|
|
|
| |
the supplied USB cable. |
|
|
| USB | |
2. Select the [Printer] menu by using the smart |
| Computer |
button. |
| Printer |
|
| |
|
|
|
■Connecting the Camera to a Printer
h If you selected [Computer], when you connected the camera to your printer, the [Connecting Computer] message be displayed and the connection will not be established. Select [Printer] menu, when you connect the camera to your printer. Depending on the make and model of the printer it may not be possible to connect your camera to the printer.
<<61>>