Samsung NV40 SAMSUNG NV40 OSD set, LCD brightness, LCD save, You can adjust the LCD brightness

Setup menu (	)
OSD set	LCD brightness

You can check shooting (Recording mode) and displayed image (Play back mode) information.

You can adjust the LCD brightness.

Full		OSD set
Basic		OSD set
Function Description		LCD Bright
Hide		LCD Save
		Start Image

Exit:BACK

Full		OSD set
Basic		OSD set
Hide		LCD Bright
		LCD Save
		Start Image

Exit:BACK

-Sub menus : [Auto], [Dark], [Normal], [Bright]

-If the [Auto] menu is selected, the LCD brightness will be set automatically according to the shooting conditions.

-If the [Auto] menu is selected in the Playback mode, the LCD brightness is fixed as the [Normal] menu.

Auto		OSD set
Dark		OSD set
Normal		LCD Bright
Bright		LCD Save
		Start Image

Exit:BACK

[Recording mode menu] [Play back mode menu]

[Full] : When the smart button is touched, the icons will be

LCD save

	enlarged and OSD will be displayed.
[Basic]	: When the smart button is touched, the icons will be
	enlarged and OSD will not be enlarged.
[Function Description]	: Function description is displayed to provide detailed
	information on a function.
[Hide]	: If the camera doesn’t operate for about 3 seconds,
	all OSD will disappear. When the shutter is pressed
	down or half way down, the available number of
	shots, shutter speed, Aperture value and Auto focus
	area will be displayed. OSD may be displayed by
	using the camera buttons except for the shutter
	button.

If the camera is not used for about 30 seconds, the power and camera status lamps blink and the LCD monitor turns off. (LCD save is only applied to the Recording mode menu.)

Off		OSD set
On		OSD set
		LCD Bright
	
		LCD Save
		Start Image

Exit:BACK

<<66>>