FAQ
[Installing codec for Mac OS]
1)Visit the following site for downloading the codec. (http://www.divx.com/divx/mac)
2)Click the [Free Download] menu on the top right side of the window then download windows appears.
3)Check the version of Mac OS and click the [Download] button to download the file and save it on a desired folder.
4)Run the downloaded file and the codec for playing back the movie clip will be installed.
h If the movie file is not played back on the Macintosh OS, use a media player that supports Xvid codec (e.g: Mplayer).
●When the DirectX 9.0 or later is not installed Install the DirectX 9.0 or later
1)Insert the CD provided with the camera
2)Run the windows explorer and select the
The DirectX will be installed. Visit the following site for downloading the DirectX. http://www.microsoft.com/directx
●If a PC (Windows 98SE) repeatedly stops responding while the camera and PC are connected.
If a PC (Windows 98SE) is turned on for a long time and the camera has to be repeatedly
In this case, disconnect the PC and the camera and Windows will start.
If the problem happens repeatedly, set the Legacy USB Support to disable and
●If the movie clip can’t be deleted, or if a removable disk can’t be extracted or if an error message displays during the file transfer.
If you install only the Samsung Master, the problems mentioned above occasionally happen.
-Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.
-Install all the application programs included in the software CD.
<<94>>