Using Map View mode
Checking shooting location on the map
The location where a picture with location information was taken and its name can be checked on the map.
Select GPS ON on the top of the camera.
4 Select a desired picture by pressing [F/t].
The location the picture was taken in is displayed.
A desired location can be viewed by pressing [D/M/F/t] to move.
Viewing the map by enlarging
1 | Set the mode dial to . |
2 | Press [o]. |
The current location is displayed on the map.
3 Press [f].
Pictures with location information are displayed in the order they were taken in.
Press [f] to cancel the thumbnail view. Press [f] once again to return to thumbnail view.
London
| Single View |
| Change Location |
Turn the dial to the right [Zoom T/Enlarge] (Turn the dial to the left [Zoom W/Reduce])
London
Enlargement adjustmen
| Single View |
| Change Location |
GPS data must be stored in an external memory to normally operate the Map View mode.
A maximum of 3 thumbnail images can be displayed on the screen.
If there is no location information on a picture, the location name is not displayed on the map in Map View mode.
GPS data for each country containing reception areas can be downloaded from the websites at www.samsung.com or www. samsungimaging.com. Refer to the websites for further information.
Extended functions 39