Using burst modes p A h n s
It can be difficult to take photos of
You can use the flash, timer, and ACB only when you select Single.
When you select Motion Capture, the ISO speed will be set to Auto.
Depending on the selected face detection option, some burst options are not available.
1 In Shooting mode, press [m].
2 Select Shooting Drive an option.Option Description
Single: Take a single photo.
Continuous:
While you are pressing [Shutter], the camera takes
photos continuously.
The maximum number of photos depends on the capacity of your memory card.
Motion Capture:
While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30
photos).
The camera automatically shows you the photos just taken and then saves them.
AEB:
Take 3 photos with different exposures: normal, underexposed, and overexposed.
Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
Shooting options 62