Samsung HT-DS470 HTDS470RH/EDC DABRelated Functions, Information Display Function, To Initialize DAB, Press INFO, Note, Bit Rate, Frequency, DAB RESET, PUSH TUNE, Ensemble Label

41P~78P(DS470)-GB 9/16/04 9:34 AM Page 69

DAB Related Functions

Information Display Function

You can check various information about the service being received.Press INFO.

•Each time you press the button during reception, the mode changes on the display as follows:

•Depending on the service information, the display may vary or does not work.DLS (Dynamic Label Segment):Teletext Display

This function may not work depending on the service area and broadcasting circumstances.

Ensemble Label Frequency Bit Rate Program Type (Pop, Classic, Rock, etc)

Note • If no button is pressed for 7~8 seconds, you will be exited from the Information Display function.

•Small letters and some special characters (Ω, /, =, ?) cannot be displayed.

OPERATION RADIO

To Initialize DAB

•With the DAB function selected, press STOP on the main unit for longer than 5 seconds.

•"DAB RESET" blinks on the display,then "PUSH TUNE" flash on the display. and the DAB function will be reset to the default setting.

•Once you have initialized DAB, you need to press the TUNE button to search the services again.

68