Samsung HW-K651 HW-K650/ZF, HW-K651/ZF REMOTE CONTROL BUTTONS & FEATURES, Inserting Battery before using the Remote Control, Controlling the Soundbar using Your TV Remote, Control, Power, SOURCE

REMOTE CONTROL BUTTONS & FEATURES

Inserting Battery before using the Remote Control

1.Use a suitable coin to turn the remote control's battery covercounterclockwise to remove it as shown in the figure below.

2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on, and then align the '●' marks side by side as shown in the figure below.

3. Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

  

Controlling the Soundbar using Your TV Remote

Control

1.Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.

2."ON - TV REMOTE" appears on the Soundbar's display.3.In the TV's menu, set the TV speaker to external speaker.cNot available if the TV ARC function or HDMI mode is in use.cAll buttons are not available except the VOL +/- and the buttons inthis function.

cTV menus differ by manufacturer and model. Refer to the TV's user manual for further information.

cManufacturers supporting this function:●VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

●This function may not be compatible with your TV's remote depending on the remote control's manufacturer.

cTo turn off this function, press the SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the Soundbar's display.

Turns the Soundbar on and off.PowerPress to select a source connected to the Soundbar.SOURCE

· 17 · English