CONNECTIONS
3.Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).
WOOFER
VOL | SOUNDB |
4.The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.
ID SET
Right Side of the Soundbar
5.When the blue indicator on the subwoofer blinks, turn on the power by pressing
6.When the connection is successfully established, the blue indicator on the rear of the subwoofer turn on without blinking.
●● If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
LED indicator lamp status on subwooferLED | Status | Description | Resolution |
|
| Standby (with the Soundbar main | Check the power supply to the |
Red | On | unit turned off) | Soundbar main unit |
Connection failed | Connect again | ||
|
| (refer to the instructions on manual | |
|
|
| connection in the user manual) |
| On | Successfully connected | - |
| (normal operation) | ||
|
|
| |
Blue |
| Standby (with the Soundbar main | Check the power supply to the |
Blinking | unit turned off) | Soundbar main unit | |
| Connection failed | Connect again | |
|
| (refer to the instructions on manual | |
|
|
| connection in the user manual) |
Red and blue | Blinking | Malfunction | Contact the service centre. |
20