Samsung C23A550U 2.5.2Static IP, Static IP User, Using "HUB Monitor, 2Using "HUB Monitor, Select Properties, 2 Using "HUB Monitor, Internet Protocol Version 4 (TCP/IPv4)

2Using "HUB Monitor"

Go to Control Panel ￿ Network and Internet ￿ Network and Sharing Center Change

adapter settings. Next, right-click on the HUB Monitor’s network device (marked “LAN9512/ LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”).

Select Properties Internet Protocol Version 4 (TCP/IPv4) ￿ Properties.

2.5.2Static IP

To configure the IP address (private or official) on your PC, someone (mostly a server system) must distribute and allot an IP address to the PC. An official IP address is allotted by your Internet service provider, and a private IP address is allotted by your Internet router. You can select whether to configure the IP address on the PC automatically or manually. The static IP address mode is used to manually enter an IP address. The static IP address mode is suitable if the IP address for the PC should not be changed (such as for a file sharing server) and generally is not used, except under such special circumstances.

When using your HUB Monitor’s or notebook PC’s LAN network, ensure you insert a LAN cable into

only one device. Otherwise, a system crash may occur.

Static IP User

1Set the LAN network for the notebook PC to Disable.

2 Go to Control Panel ￿ Network and Internet ￿ Network and Sharing Center Change

adapter settings. Next, right-click on the notebook PC’s network device and select Disable.

2 Using "HUB Monitor" 32