1. Manuals
  2. Brands
  3. Computer Equipment
  4. Computer Monitor
  5. Samsung
  6. Computer Equipment
  7. Computer Monitor

Samsung C23A550U Using "HUB Monitor, 2Using "HUB Monitor

LC23A550US/CI, LC23A550US/EN, LC23A550US/KZ, LC23A550US/ZA, LC23A550USSCI, LC27A550US/CI, LC27A550US/EN, LC27A550USSCI

1 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 87
Download on canonical page 87 pages, 4.84 Mb

2Using "HUB Monitor"

3Right-click on the HUB Monitor’s network device (marked “LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), and select Use.

Be sure to perform this process before configuring the IP.

4Configure the static IP. Assign the static IP that is allotted to the HUB Monitor’s network device.

Go to Control Panel

￿ Network and Internet

￿ Network and Sharing Center → Change

adapter settings. Next, right-click on the HUB Monitor’s network device (marked “LAN9512/

LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), select Properties

Internet Protocol

Version 4 (TCP/IPv4)

￿ Properties, and configure the static IP and DNS settings.

5After configuring the IP, click OK. The following message will appear.

A static IP must be allotted to only one network device. The following message will appear if the same static IP is allotted to the network devices of both the notebook PC and HUB Monitor. (Ensure the network device that is not in use is set to Disable.)

Select No in the message window.

To use the notebook PC’s LAN network, set the HUB Monitor’s network to Disable and the notebook PC’s network device to Use. Next, configure the IP settings.

2 Using "HUB Monitor" 33

MENU

Models

Contents