Parts
Control Panel
DCH
Speaker
Remote sensor & Panel Key
DCH
Spacer logo
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
| Power on | Press and hold for three seconds. |
|
|
| Press the panel key. A popup menu appears. |
| Power off | Make sure Power off is selected and then, press and hold the panel key until the |
| display turns off. |
|
|
| Press the panel key. A popup menu appears. |
| Select source | Press the panel key again to select Source. Then, press and hold the panel key to cycle |
| through the desired source. |
|
|
| Spacer logo (optional) | Do not pull on the spacer logo using force. The logo may tear or break off. |
|
|
| Press a button on the remote control pointing at the remote sensor on the product to |
| perform the corresponding function. |
| ――Using other display devices in the same space as the remote control of this product |
| can cause the other display devices to be inadvertently controlled. |
| Use the remote control within 7 m to 10 m from the sensor on the product at an angle |
| of 30° from the left and right. |
| The product’s screen also works as a remote sensor. |
| Remote sensor | When pointing the remote control at the screen, make sure: |
| •• the remote control is pointing towards the center of the screen. |
| •• to use the remote control 40 cm to 70 cm away from the screen. |
| ――Store used batteries out of reach of children and recycle. |
| ――Do not use a new and used battery together. Replace both batteries at the same |
| time. |
| ――Remove batteries when the remote control is not to be used for an extended period |
| of time. |
•• To use the panel key, make sure the sliding panel key is not protruding from the bottom of the product.
•• To use remote/eco sensor, make sure the sliding panel key is protruding from the bottom of the product.
15