Samsung MZ-7KM480 manual 11

			Samsung SSD Magician DC	11
Option	Arguments	Description	Used With
-e [--execute]	--offlineshort	“--[offline/captiveshort/extended/selective]"
	--offlineextended	execute SMART Short/Extended/Selective
	--offlineselective		-S [--smart]
		self-test routine in off-line/captive mode.
	--captiveshort
		“--abort" abort off-line mode self-test routine.
	--captiveextended
	--captiveselective	“--checkstatus" get the current progress and result
	--abort	of off-line self-test.
	--checkstatus
-M [ --setmax]	-d [ --disk ],	Performs SETMAX related operations on specified	N/A
	-s [ --set ]	SSD.
-s [ --set ]	LBA address	Set Max address value with the given number.	-M [--setmax]
-r [--read-native-	N/A	Retrieve Native Max Address of the specified disk.	-M [--setmax]
max]
-W [--setfeature]	-d [ --disk ]	Used to issue Set Feature command on specified	N/A
		SSD.
-w [--write	1 [ Enable ] or	Sets the status for write cache.	-W [--setfeature]
cache]	0 [ Disable ]
-r [--rawdata]	Raw values of	Send Feature Command with the input raw value.	-W [--setfeature]
	Feature, Sector	'arg' is the combination of Feature:SectorCount:LBA.
arg	Count, LBA in the	For hexadecimal value should be input with “0x”.
	form of
	{Feature}:{Sector
	count}:{LBA}
-X [--sct]	-d [ --disk ]	Used is to execute SCT commands.	N/A
-T [--trim]	-d [ --disk ]	Used to increase the performance of the selected	N/A
		disk.
-F [--	-d [ --disk ]	Used to update the firmware of the selected disk	N/A
firmware-		connected to HOST system.
update]
-E [--erase]	-d [ --disk ]	Used to erase all the data on the drive by issuing an	N/A
		ATA Format Unit command.
-I [--info]	-d [ --disk ]	Used to display details of the selected disk.	N/A
	-d [--disk],
-O [--	-q [--query] or	Used to set the -disk's shrink/expand size to the	N/A
over-	-s [ --set ] or	given value
provisi	-c [ --clear ]
on]
-q [ --query ]	N/A	Queries current Over-Provision status of Specified	-O [--over-provision]
		disk.
		Sets Over-Provisioning on specified disk. 'arg' is
		amount of over provisioning to be set in format
-s [ --set ], arg	N/A	[XXGB or XXMB or XX%]. Percentage is with respect	-O [--over-provision]
		to the disk size. If no value is present, it will default
		to the recommended OP amount.